777
Senior Member
- Joined
- Jan 1, 2019
- Messages
- 486
- Likes
- 360
Guys what sound format do you recommend on Windows 10? I'm only listening to music (Flac).
View attachment 21449
Doesn't matter. Use HQPlayer(WASAPI) with bit-perfect at 768khz/32bit
Guys what sound format do you recommend on Windows 10? I'm only listening to music (Flac).
View attachment 21449
Guys what sound format do you recommend on Windows 10? I'm only listening to music (Flac).
View attachment 21449
I'm waiting the topping d50, i read that don't comes with power supply, but only with the usb power? So do i need one of this usb dc5v adapters?https://www.amazon.it/MyGadget-Cari...&qid=1549583835&sr=8-4&keywords=adattatore+5v and will it sound good with? Thx
I hope someone gonna help us, i don't even know which power supply i must buy.. Btw wich amp are you pairing D50 with? Today as arrived to me the JDS Atom, i'm waiting d50 so i'm pre-amping with an Sony Pha-3Hi , i was wondering the same a few day ago before buying my d50 ... when it arrived home , i didnt had the time to buy the power supply. So i finaly used it with the 2 usb to my desktop , 1 for data and 1 for power ... All i have to say is it sound awsome ! no noise even max volume with high gain ... dead silent !
I hope someone gonna help us, i don't even know which power supply i must buy.. Btw wich amp are you pairing D50 with? Today as arrived to me the JDS Atom, i'm waiting d50 so i'm pre-amping with an Sony Pha-3
So if i choose a power supply with 2-3A is better without any negative effect instead of 1A?i know what power supply i need , anything 5v with over 1 A .
So if i choose a power supply with 2-3A is better without any negative effect instead of 1A?
svetdts:
Здравствуйте, я получил свой D50 два дня назад, но коаксиальный вход топпинга не работает.. Мой коаксиальный кабель находится в хорошем рабочем состоянии, потому что когда он подключен к моему приемнику Yamaha, есть музыка.В чем может быть проблема?
service
Привет
Thank you for contacting TOPPING support. We are happy to assist.
There are 3 possibilities will case this problem.
1, the connection between your player and D50 is not good enough.
2, the S/PDIF signal from your player is not a standard signal, D50 required a standard signal.
3, your player is not outputting a S/PDIF signal.
You can check these and find the solution.
So, is this a service !?
Good day, ladies and gentlemen. Information for those who do not work coaxil input! It's epidemic. The cause of failure found: defective Dual Inverter Gate. In DAC, it is denoted as C04F. I replaced it with Texas Instruments SN74LVC2G04DBVR CMOS 6-Pin SOT-23. The unit earned.svetdts:
Hello, i received my D50 two days ago ,but Topping's coaxial entry does not work.. My coaxial cable is in good working order, because when it is plugged into my Yamaha receiver, there is music.What could be the problem?
service
Hello
Thank you for contacting TOPPING support. We are happy to assist.
There are 3 possibilities will case this problem.
1, the connection between your player and D50 is not good enough.
2, the S/PDIF signal from your player is not a standard signal, D50 required a standard signal.
3, your player is not outputting a S/PDIF signal.
You can check these and find the solution.
So, is this a service !?
Or just plug into a USB port.I'm waiting the topping d50, i read that don't comes with power supply, but only with the usb power? So do i need one of this usb dc5v adapters?https://www.amazon.it/MyGadget-Cari...&qid=1549583835&sr=8-4&keywords=adattatore+5v and will it sound good with? Thx
I reported the problem before.
I think that this problem is due to incorrect setting of the reception signal level of Topping D50 or misconfiguration.
My two D50s have already gone to other places and can not be examined.
However, I was relieved that someone noticed this problem besides me.
There are other problems as well.
If you play a song of PCM 384k after playing a song other than PCM 384k, a big pop noise will occur.
This problem is also common to D50 DX7s DX3 Pro.
I think these problems should be reported to Topping.
My d50 has the same problem - it does not work with COAX connection. Maybe this is a defect?
You didn't change USB port did you? lol. For me using equalizerAPO that would have the same effect, new driver idDrivers suddenly disappeared yesterday and now device appears in Device Manager as "Topping DFU" with a D50 speaker in Audio Inputs and Outputs. Any idea what is causing this?
You didn't change USB port did you? lol. For me using equalizerAPO that would have the same effect, new driver id
Drivers suddenly disappeared yesterday and now device appears in Device Manager as "Topping DFU" with a D50 speaker in Audio Inputs and Outputs. Any idea what is causing this?
You didn't change USB port did you? lol. For me using equalizerAPO that would have the same effect, new driver id
A guess for simplest trouble shooting as possible is first try install device on other computer that haven't seen this unique device before, and if it fails there should tell firmware or hardware on device is failing and try if latest firmware can be reflashed to unit, if unit installs flawless on other computer guess Windows has got some criss cross points wrong into registration database and guess it could be repaired by uninstall any driver or software package in Controll panel while unit is disconnected and then into device manager tick on show hidden devices and remove any instance that belong to failed device, and then after a restart try re install device and see what happens now.No i didn't.. and no matter how many times i reinstall the drivers... it won't come back.