Revel M16 Speaker Review

[shiseido]

Its easy to put back the woofer trim, isnt he glued?

 

[Matt_Holland]

Its easy to put back the woofer trim, isnt he glued?

No glue. Friction fit using felt

 

[Sal1950]

I thought I’d try on mine and it’s quite straightforward.

What are the spots you have highlighted in the Red Circle?

 

[Matt_Holland]

What are the spots you have highlighted in the Red Circle?

Those are screws that fix the tweeter waveguide to the baffle. You can only just see them with the woofer in place.

 

[Sal1950]

Those are screws that fix the tweeter waveguide to the baffle. You can only just see them with the woofer in place.

OK, sorry for the dumb question, I thought it had to do with something like that, but I just couldn't see anything there. LOL

 

[Matt_Holland]

I’m

OK, sorry for the dumb question, I thought it had to do with something like that, but I just couldn't see anything there. LOL

tge light wasn’t great but I’ve tried to enhance the photo and zoomed in a bit more.

 

[nathan]

I thought I’d try on mine and it’s quite straightforward.

Basically you remove the woofer trim ring by gently pulling on its inside lip. If you have large fingers this might prove difficult.

Once the woofer trim is removed you will then need to remove the woofer itself so that you can access two screws that hold the tweeter waveguide in place. I didn’t go any further than removing the woofer trim ring, but I assumed the rest.

View attachment 508274

View attachment 508276

View attachment 508277

Great info. Thanks for posting!

 

[Guddu]

Does anyone know how to tighten the waveguide on M16?
Any information would be great help.

There are 2 clamp levers that tighten up waveguide to the case.
1) Remove magnetic ring
2) Unscrew and remove the mid-base driver
3) Then you can get to the levers easily to tighten up or loose if want to takeout the waveguide.

Thank you for responses.

 

[BobbyTimmons]

Those are screws that fix the tweeter waveguide to the baffle. You can only just see them with the woofer in place.

Is it easy to remove the crossover in these for servicing?

 

[Matt_Holland]

Is it easy to remove the crossover in these for serving?

Not sure Bobby as I didn’t remove the woofer. My guess is that as a mass produced speaker they would have made it easy to assemble and therefore disassemble

 

[BobbyTimmons]

I found these pictures from a Polish site www.avtest.pl.

Revel Concerta 2 M16 - Audio-Video - Testy sprzętu stereo i wideo

Zestawy głośnikowe Revel Concerta 2 M16 dają duży, ciepły, emocjonujący dźwięk o nienagannej spójności w średnicy i górze pasma. Niezwykle uniwersalne kolumny pod względem muzyki i sprzętu towarzyszącego. Łatwe do wysterowania, nie będą stanowić problemu dla systemów all-in-one, nie wspominając...

www.avtest.pl