Besides crossover point, box shape, and of course, amt tweet vs dome/waveguide, I think distortion may be similar past 100hz, but definitely revel tweeter at 96db is better than the b1+'s tweet (tested here).
The m106's woofer magnet looks bigger in videos than the magnet on the sb17nbac35..............
you can see the magnet during the first 10's of seconds here during the gr research breakdown of the revel.
here is a pic of the sb17nbac on madisound (smaller magnet)
So, short of the slitted cone and cone material, it doesn't have copper cap nor shorting ring (or rings)..........
And the vertical dispersion would be sketchy on the t0+ seeing as we don't have a clue where the bottom woofer rolls off at or how much a larger dust cap knocks down its output.
Thoughts ?
discuss ?
maybe it is a moot question as the t0+
"The TZero+ is being discontinued."
post from july last year...................
Emotiva Airmotiv B1+ Review (Bookshelf Speaker)
This is a review and detailed measurements of the Airmotiv B1+ two-way bookshelf speaker. It was kindly sent in for testing by a member and costs US $229 a pair. Currently Emotiva shows it as unavailable though so don't know if it is discontinued or what. The B1+ looks like other Emotiva...
www.audiosciencereview.com
Revel M106 Bookshelf Speaker Review
This is a review and detailed measurements of the Revel M106 bookshelf speaker. It was kindly purchased and drop shipped to me. It is not a new sample but came to me with full packaging and protective wrapper. The M106 costs US $1,000 each or $2,000 for a pair. It is only sold through dealer...
www.audiosciencereview.com
The m106's woofer magnet looks bigger in videos than the magnet on the sb17nbac35..............
you can see the magnet during the first 10's of seconds here during the gr research breakdown of the revel.
here is a pic of the sb17nbac on madisound (smaller magnet)
SB Acoustics SB17NBAC35-4 Aluminum Cone Woofer - 4 ohm
SB Acoustics SB17NBAC35-4 Aluminum Cone Woofer - 4 ohm
www.madisoundspeakerstore.com
So, short of the slitted cone and cone material, it doesn't have copper cap nor shorting ring (or rings)..........
And the vertical dispersion would be sketchy on the t0+ seeing as we don't have a clue where the bottom woofer rolls off at or how much a larger dust cap knocks down its output.
Thoughts ?
discuss ?
maybe it is a moot question as the t0+
"The TZero+ is being discontinued."
post from july last year...................
Last edited: