- Joined
- Jul 21, 2020
- Messages
- 84
- Likes
- 126
Same II mark next to USB2 source on Okto.
When trying an external RPi/MoOde I get this MPD alsa fail message.
Have you tried to 'load defaults' in the okto's system submenu and select coax1 and connect your CD transport to coax1?
If this does not work you could ssh into the RPi and execute "lsusb" while the RPi is connected to the Okto via USB and the okto is on and usb source is selected. The okto should appear in the list of connected USB devices.