New RME ADI-2 Pro EX DAC

[Roland68]

Hopefully that's non-final silkscreening on the back, and the line outputs are still independent - so I can use them as sub outs with their own EQ.

The labels are perfectly fine.
You can find a thread titled "ADI-2/4 as Active crossover" in the RME forum; that should answer your questions.

 

[Guy.G]

The labels are perfectly fine.
You can find a thread titled "ADI-2/4 as Active crossover" in the RME forum; that should answer your questions.

Well that's my concern.
The ADI-2/4 Pro SE has independent outputs on the back.
This ADI-2/4 Pro EX appears to have coupled outputs like the standard ADI-2 models.

ADI-2/4 Pro EX listing "Line Outputs 1/2"

ADI-2/4 Pro SE listing "Line Outputs 1/2, (3/4)"

 

[BassTinker]

Good point, that would be really sad if they take away that feature. May @MC_RME could clarify?

 

[KSTR]

This ADI-2/4 Pro EX appears to have coupled outputs like the standard ADI-2 models.

There is no ADI-2/4 Pro EX. Only ADI-2 Pro EX, which is a basically a ADI-2 Pro re-issue and has nothing to do with the ADI-2/4 Pro.

 

[Bland_username42069]

There is no ADI-2/4 Pro EX. Only ADI-2 Pro EX, which is a basically a ADI-2 Pro re-issue and has nothing to do with the ADI-2/4 Pro.

The back is the 2/4 SE - you can see the ground screw they added for the turntable input.

 

[BassTinker]

There is no ADI-2/4 Pro EX. Only ADI-2 Pro EX, which is a basically a ADI-2 Pro re-issue and has nothing to do with the ADI-2/4 Pro.

There is. It is just not released yet. Read my last two/three posts here, the ADI-2/4 Pro EX was showcased at High Ende Vienna and the first drivers for it are already downloadable on RME's Website.

 

[KSTR]

There is. It is just not released yet. Read my last two/three posts here, the ADI-2/4 Pro EX was showcased at High Ende Vienna and the first drivers for it are already downloadable on RME's Website.

I stand corrected.

 

[enricoclaudio]

The back is the 2/4 SE - you can see the ground screw they added for the turntable input.

That screw you see on the back is part of the new USC-C lockable cable, not a phono ground screw.

 

[Bland_username42069]

That screw you see on the back is part of the new USC-C lockable cable, not a phono ground screw.

I meant in top left but looking again I’m not sure how that is supposed to work as there actually isn’t a screw

 

[MC_RME]

Don't worry, we don't take something away, we only add. I am currently working heavily on the 2/4 Pro EX manual

Not so long anymore and we can officially talk about this unit.