NAD M10 V3 BluOS STREAMING AMPLIFIER

[Mike_Trueman]

My NAD suddenly is unable to check for updates and the list of available services to connect to is empty. Meanwhile it is controlled by the app and I can see it on my router’s DHCP leases list though I cannot ping it. What can be a problem? Do I need to hard reset it and loose all Dirac settings?

Are you able to see your logs on your network?

You are able to see your diagnostic logs without having to send a support ticket. You can enter the following command in your Web Browser: "IP ADDRESS/diag?print=1". Replace the IP ADDRESS with the actual IP Address of your M10 and you will be able to see the log.

Example: http://160.168.0.532/diag?print=1

 

[aspen63]

Yes, with https I can. What should I look for in it?

 

[aspen63]

The last entry in the log is from March, 14 preceded by a lot of staff from January, 1.

 

[Mike_Trueman]

The last entry in the log is from March, 14 preceded by a lot of staff from January, 1.

What is the BluOS version for your controller and your player?

 

[aspen63]

iOS 4.14.2, Android 4.14.3, BluOS 4.14.12.

 

[smurf_2010]

NAD Electronics Brings Dirac Live Bass Control to Select BluOS Streaming Amplifiers​

https://nadelectronics.com/blogs/news/nad-electronics-brings-dirac-live-bass-control-to-select-bluos-streaming-amplifiers?srsltid=AfmBOoo6O2sv6zmZI5J2yogxyTQLDH9fuAz9PkLjUBjbBOZyLxPtipgZ

“With Dirac Live Bass Control, we’re continuing to elevate the NAD listening experience by bringing more precise and intelligently optimized bass performance to our most advanced BluOS streaming amplifiers,” said Morten Nielsen, Product Manager at NAD Electronics. “This update not only enhances our newest generation of streaming amplifiers like the M33 V2 and M10 V3, but it also reinforces our commitment to supporting older generation products through the BluOS platform.”

 

[smurf_2010]

Bass Control​

License for NAD M10 V3

• Subwoofer integration add-on
• Requires Room Correction

$299

https://www.dirac.com/products/bass-control

 

[MingChops]

I am quite shocked NAD came through and added this to all those past products. I really thought we'd be looking at only the M10 V3 and M33 V2 being the DLBC additions.

I'm still glad I bought my V3, but turns out I could have bought a used v1/2 and saved some money! And as for NAD adding brining out on the C658, again that's really quite great too. Could have saved a ton of money on the M66!

So Qudos NAD really, even if it took a length of time that became a little bit beyond a joke!

 

[samysound]

M10V3 Owners, have all the hardware and software bugs been worked out on the M10V3? Are the subwoofer outputs and signal levels functional? Any major kinks or issues?

 

[aspen63]

When I enter BluOS iOS app it constantly says WiFI Not Connected Please enable WiFi when it is actually set up and the unit is connected via ethernet cable. When I press Open WiFi settings buttons it takes me to the meaningless iOS settings page related to BluOS app without any WiFi settings and local network enebled. It's very annoying. Reinstalled the app, didn't help. What can I do?

 

[smurf_2010]

WiFi when it is actually set up and the unit is connected via ethernet cable.

Try removing the ethernet cable, then find the amp through the BluOS iOS app through Wifi.