• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Moondrop Releases Two New Speakers: Moondrop M4A-MTM and Moondrop MM3A

Well, Edifier mr4.5 also claims this frequency response, plus "wide sweet spot". Both are active, have app support etc
It might be that 4.5 can play louder
Delivering 80W RMS total output and peak SPL of 98dB (@ 1 meter)


1788543710792.png


I'd be very interested in comparing them both
 
Last edited:
Sound samples MM3A vs M-audio:
 
Last edited:
I hope the m4a has not been shelved, as I see no mention of it anywhere online, including the moondrop website. With auto calibration and sub out for both, it looked really interesting. All I see is the m4p which looks quite generic by comparison.
 
Last edited:
Anyone bought them yet?
 
I have just ordered them.
Since a short time I have new glasses and the 'legs' makes wearing my Sennheisers -for a long time- quite annoying.
 
FYI, Erin has a spin of the powered version of the MTM speaker. It does okay even if it's as usual fairly SPL limited, understandable considering the size.


It's likely that the MM3A is the same, okay and very SPL limited.
 
Sure, but the bas driver is not the same either. Clearly mm3a is not made for normal stereo but just for desktop
 
A mostly subjective review but with some measurements and comparison with more expensive and bigger Yamaha monitors
Not exactly neutral speakers in his measurements, quite a dip around 1khz, it's not very detailed in more complex music
Both mm3a and Yamaha have idle white noise from the tweeter so the electronics is not superb either
Lastly an entire song has been recorded in an untreated room playing through the mm3a


A drop indeed:
1791228879415.png
 
Last edited:
OK, more in this video, including measurements

He also opens the speakers up to have a look inside
Amp is clean when it comes to distorsion but noise dominates

Speaker itself has bas boominess and recessed midrange, just like the previous test, nothing one could call neutral

From the looks of this it seems like Edifier mr3, mr4.5 and 5 are better choices
Probably m60 and m90 as well
 
I have them in use for 2 days now.
They were ordered at ShenzenAudio, I paid about 175 euro incl. taxes.
They are playing via USB connected to moode player (Pi 3A+).
Overall, I'm quite happy, they are only a bit smaller than expected.

As my measuring equipment is in storage, I dialed in some Camilla DSP filters 'by ear'.
As said, I'm happy with them, but I wouldn't consider it a monitor for home mixing.
For 'muziek terwijl u werkt' (background music at my desk) they are good.
 
Well, it doesn't seem like the marketing is very accurate. It's not hyper-clean nor is the frequency response that great, it's rather v-shaped. I wouldn't expect stellar performance from any plastic speakers
 
Huh, disappointing that the actual on-axis for the MM3A doesn't resemble the marketing graphs at all. Erin's measurements of the M4P look decent but they're >$900 a pair and passive so not really competitive unless super-narrow vertical directivity is something you absolutely need. Definitely just go to the lower-tier Ascilab speakers at that price. Or get a used pair of Genelecs for less.

Too bad, I thought these could actually shake up the market.
 
Received my pair today. Overall I'm pretty happy with them. They are silly small, which I am quite a fan of. I don't need the space, I just think they're cute. The app is pretty good. It connects seamlessly, and allows the user to select EQ presets or do their own parametric EQ. The bass is quite strong for their size, though the limiters kick in pretty quick. It's fun watching the PRs vibrating. I have a few complaints. It has an auto standby feature that you cannot turn off. Once it goes into standby, it won't even detect a Bluetooth signal, so you have to physically reach behind the speaker and push the power button every time you listen to them, if you'll primarily be using Bluetooth. The plastic looks pretty cheap. There is no subwoofer output. The supplied cable that connects one speaker to the other is pretty short, which may pose an issue if you planned on using these as tv speakers. Other than that, first impressions are solid.
 
I have these on my desk courtesy of Bryguy.

A mostly subjective review but with some measurements and comparison with more expensive and bigger Yamaha monitors
Not exactly neutral speakers in his measurements, quite a dip around 1khz, it's not very detailed in more complex music
Both mm3a and Yamaha have idle white noise from the tweeter so the electronics is not superb either
Lastly an entire song has been recorded in an untreated room playing through the mm3a


A drop indeed:
View attachment 562851

They barely have any self noise at all. You can barely hear it even with your ear squished up against the speaker. Some of the quietest active speakers I've ever heard, much lower self noise than genelec 8030 or kh80. Easily the lowest self noise I've heard on an active speaker, on par with my topping mini 300 amps being fed directly to a tweeter. Hoenstly impressive self noise performance and what ALL active speakers should strive for.

His measurements are filled with room/desk reflections, and these tiny speakers tend to react more to boundaries than larger speakers on account of just being really dang wide in dispersion. We have confirmation from Cuckoo that the speakers don't exhibit the response issues shown in the 'review' you have shared. I don't think the guy in your video is a real reviewer...

After EQ I find they sound quite good, quite addicting to listen to. The DSP is easy to impliment, importing REW generated filters is easy. They seem to hit all my SPL needs. I am confused why they lack a sub output though. For the price and use case I think these are great. The power on and input select noises can be turned down or off. I do wish the LED could be disabled, white electrical tape will fix that.
 
Back
Top Bottom