I need help from someone with experience with either, Audiolense, UDIO-8 or Focusrite Audio Interface or even better, preferably all. Might be a hard ask...
What I am doing is specific but in order to use the minidsp ASIO driver for measuring within Audiolense I need to choose both input and output as minidsp ASIO(or possibly Focusrite ASIO). I am not sure how to use the input on the UDIO-8.
Focusrite Mix controller has been routed properly and I can get sound to come out of the SPDIF out of the interface.
1. Do I just connect the RCA cable from the Focusrite out to the BNC input with an adapter between the two RCA connections?
2. Does it go into input 1/2? I mean do I have to somehow route the inputs for UDIO-8 to know that it will recieve input? My understanding is that 1/2 do not need routing they work autmotacally.
3. and do I choose minidsp ASIO or Focusrite ASIO for playback and input in the measurement box? I think it has to be minidsp ASIO but I am getting no feeback for the mic so I must be doing something wrong.
EDIT.
Maybe I should rephrase this.
If I chose Foccusrite ASIO then the SPDIF out of the Scarlett will go into the UDIO-8 input but how does the UDIO-8 input go out through the output of the UDIO-8? If that is what is supposed to happen. With this option I get the mic working but can't get output from the system.
If I chose UDIO-8 minidsp ASIO, I have the channel routing for the tri-amp good but can't get any feedback for the mic. How does the UDIO-8 know that it needs to receive the input from the Focusrite?
What I am doing is specific but in order to use the minidsp ASIO driver for measuring within Audiolense I need to choose both input and output as minidsp ASIO(or possibly Focusrite ASIO). I am not sure how to use the input on the UDIO-8.
Focusrite Mix controller has been routed properly and I can get sound to come out of the SPDIF out of the interface.
1. Do I just connect the RCA cable from the Focusrite out to the BNC input with an adapter between the two RCA connections?
2. Does it go into input 1/2? I mean do I have to somehow route the inputs for UDIO-8 to know that it will recieve input? My understanding is that 1/2 do not need routing they work autmotacally.
3. and do I choose minidsp ASIO or Focusrite ASIO for playback and input in the measurement box? I think it has to be minidsp ASIO but I am getting no feeback for the mic so I must be doing something wrong.
EDIT.
Maybe I should rephrase this.
If I chose Foccusrite ASIO then the SPDIF out of the Scarlett will go into the UDIO-8 input but how does the UDIO-8 input go out through the output of the UDIO-8? If that is what is supposed to happen. With this option I get the mic working but can't get output from the system.
If I chose UDIO-8 minidsp ASIO, I have the channel routing for the tri-amp good but can't get any feedback for the mic. How does the UDIO-8 know that it needs to receive the input from the Focusrite?
Last edited: