I thought i create a little thread so others can add things they notice that do not work. Please only list things that are real bugs, not features that are missing (like all that dirac stuff).
As the support gives a sh... when reporting those, maybe someone else will read that with some more "influence" to marantz
I own a cinema 50 and have following problems:
- CEC does often not work. When i power on the AVR (Cinema 50), my HTPC and my TV are still dead. I have to power it on for about 3 or 4 times to get it working. If at all. Thats why i usually power on the TV, then the AVR turns on at about a 50% rate
- When using crossover at 80hz/100hz, the center gets all signals, no matter how deep they are
- Tone dies completely after playing some specific auro3d content - have to reboot the AVR
- not so critical, but also a bit annoying: the menu is quiet slow when started and when changing the tone format the avr gives no sound signal for about 2-3 seconds (iirc my 7011 didn't do that)
As the support gives a sh... when reporting those, maybe someone else will read that with some more "influence" to marantz
I own a cinema 50 and have following problems:
- CEC does often not work. When i power on the AVR (Cinema 50), my HTPC and my TV are still dead. I have to power it on for about 3 or 4 times to get it working. If at all. Thats why i usually power on the TV, then the AVR turns on at about a 50% rate
- When using crossover at 80hz/100hz, the center gets all signals, no matter how deep they are
- Tone dies completely after playing some specific auro3d content - have to reboot the AVR
- not so critical, but also a bit annoying: the menu is quiet slow when started and when changing the tone format the avr gives no sound signal for about 2-3 seconds (iirc my 7011 didn't do that)