FriedChicken
Active Member
- Joined
- Mar 10, 2021
- Messages
- 128
- Likes
- 53
I already have an M-65 power amplifier, I’ve now picked up an MX-1000 that according to the seller has a “blown fuse”.
I plan on dropping both of them off to get serviced, the M-65 to remove the Sony glue, the MX-1000 for repair and service. I plugged the MX-1000 in. It appeared to power on, but connecting an audio source, as expected, gave no output. It’s going to remain safely away from power until it gets repaired.
I plan on dropping both of them off to get serviced, the M-65 to remove the Sony glue, the MX-1000 for repair and service. I plugged the MX-1000 in. It appeared to power on, but connecting an audio source, as expected, gave no output. It’s going to remain safely away from power until it gets repaired.