Do you know how to create a filter set for UAPP with shelves using REW, but so that the set does not contain more than 10 filters (this is a limitation of ToneBoosters)?
-
Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!
JCALLY JM20 Headphone Dongle Review
- Thread starter amirm
- Start date
Thank you! This type of EQ does NOT able to generate shelves. And in the mode that is able to generate EQ with shelves, you can NOT restrict a number of the filters.
- Joined
- May 15, 2019
- Messages
- 1,033
- Likes
- 4,334
Aaah, I see. Sorry, don't know then.
In this pic I thought you can enable a low and a high shelf: https://forum.rme-audio.de/viewtopic.php?pid=221540#p221540 but most probably greyed out means not available.
In this pic I thought you can enable a low and a high shelf: https://forum.rme-audio.de/viewtopic.php?pid=221540#p221540 but most probably greyed out means not available.
I apologize for the asinine question, but with all the versions available,which model should I pick for not difficult headphones? No ADC necessary, no mic. And is there a version for iPhone connector?
Again, sorry.
Again, sorry.
This thread is about the JCally “JM20” (not JM20-Max, JM20-Pro or any other JMxx).
If you want a USB-C dongle for an easy to drive headphones, the “JM20” should do fine… And no, there is no iPhone Lightning connector version (probably never will since iPhones have moved to USB-C).
Perfect answer. Thanks. My iPhone is an older version, I'll use the iPhone dongle when I need it then.
I asked te question as there have been so many version discussed in this "forum", that I just wanted to make sure.
This:
TANCHJIM Luna Portable HP Amp & DAC Review
This is a review, detailed measurements and listening tests of TANCHJIM Luna portable headphone amplifier and DAC. It was sent to me by the company and costs US $139.99 with anime engraving or $129.99 without: The look and feel of the adapter is excellent. The controls for volume have...
www.audiosciencereview.com
Oi Matias! Muito obrigado!This:
TANCHJIM Luna Portable HP Amp & DAC Review
This is a review, detailed measurements and listening tests of TANCHJIM Luna portable headphone amplifier and DAC. It was sent to me by the company and costs US $139.99 with anime engraving or $129.99 without: The look and feel of the adapter is excellent. The controls for volume have...
But $130 vs around $20...
I will not mention 4-1.
I saw the JM30L dongle with old's iPhone connector.
multiformous
Member
- Joined
- Jul 20, 2023
- Messages
- 74
- Likes
- 67
Measurements of the JM20 MAX on site here.
staticV3
Grand Contributor
- Joined
- Aug 29, 2019
- Messages
- 12,510
- Likes
- 20,814
Of course - but I do not know which thread is correct.
That is, from the point of view of theory, is it not a mistake to adapt both IE and OE using a diffuse field target?
If yes, what modification of this target do you recommend using - and where can I download it from? Thank you for your help!
I bought a JM30-L from Aliexpress with an iPhone's connector (L).
I believe USB 2.0 is backward compatible with 1.0. Are you sure it’s not about UAC 1.0 vs. UAC 2.0?
Sorry i was talking about UAC 1
Kuang Pai 2 has a UAC 1.0/2.0 switch (single CS43131, no idea how it performs). More expensive, Shanling UA1 Plus (dual CS43131 but 3.5mm SE), FiiO BTR 13 and its brother Snowsky Nano Retro are UAC 1.0 only (dual CS43131, 3.5/4.4mm, BT).
I’m sure there are other…
Last edited:
Similar threads
- Poll
- Poll
- Poll