My HT and stereo setup with 2xR263, RC263, 6xR162, 4xR12 in 5.4.4, waiting for Onkyo TX-RZ50 to complete it.
Great price/performance at Infinity's lowest deal price that happens multiple times per year.
You can spot the
@Buckeye Amps NC502MP for the front, center and rear - my exploration of AVR vs better power amp and preparation for the eventual AVP in a few years.
Btw I
stuffed the ports of all speakers and subs with foam - planning to do some measurements and comparison of stuffed vs not. All the speakers are rear-ported and I can't pull them away from the walls so I thought I could cut some of their low end, being crossed over at 80Hz anyway.
Couldn't find any good info around on the topic to validate my assumptions, I'd appreciate if someone can share experience or a resource on stuffing speaker and sub ports. I'll measure and experiment myself after RZ50 arrives.
Overall pretty happy with the system currently with Denon AVR-X3500 even after very basic calibration with MiniDSP 2x4HD for the subs and Audyssey for the speakers.
Here's the Audyssey data - my curve and the speaker measurements. It's obvious my bass needs more than the quick REW measurement and EQ I did. Four subs provide great potential and it will take some learning and time to get right.