officialsm
Member
- Joined
- Apr 6, 2021
- Messages
- 99
- Likes
- 14
Hi all,
I have a Raspberry (as described here https://www.audiosciencereview.com/forum/index.php?threads/improve-raspberry-4-streamer.22401/ ) and i bought a linear power supply. Previously i'm using a switching power supply.
Switching power supply was setted up around 5.28 Volts (5 Ampere) because i have installed a power management board (from Audiophonics) that drops down a little voltage. With this configuration no issue.
With new linear power supply i have frequently under voltage errors in syslog like this:
Under-voltage detected! (0x00050005)
i improved volts around 5.35 volts but still have issue.
Seems that nee power supply had not stable volts erogation and it drops down volts sometimes.
Raspberry and streaming works same but i would like to avoid this kind of errors.
Someone could help me to investigate?
Thank you so much
I have a Raspberry (as described here https://www.audiosciencereview.com/forum/index.php?threads/improve-raspberry-4-streamer.22401/ ) and i bought a linear power supply. Previously i'm using a switching power supply.
Switching power supply was setted up around 5.28 Volts (5 Ampere) because i have installed a power management board (from Audiophonics) that drops down a little voltage. With this configuration no issue.
With new linear power supply i have frequently under voltage errors in syslog like this:
Under-voltage detected! (0x00050005)
i improved volts around 5.35 volts but still have issue.
Seems that nee power supply had not stable volts erogation and it drops down volts sometimes.
Raspberry and streaming works same but i would like to avoid this kind of errors.
Someone could help me to investigate?
Thank you so much