Is it possible to measure Infrasonics with a UMIK-I?

[GXAlan]

Thanks for the input!
No I use the stock config + calibration. How do I change it?

One moment, please...

You have to unscrew the bottom ring. It comes out easily if it’s not glued by creating a spanner wrench out of a paper clip.Early revisions had glue which requires using something like Goof Off.

“Some of the early microphone had that ring glued by mistake so it's not very easy. All latest batch can easily be opened with a simple tweezer inside the 2 holes of the ring at the bottom of the microphone (USB connector side)”

You then adjust one number in the calibration file. My UMIK-1 is an 18 dB version with micro USB. The first gen had 12 dB. The latest version is usb-C. I had to unglue mine.

 

[lucian]

You mean the name of the show?
It's called Kaiju No. 8
Basically a Anime about Japan if "Godzilla" was happening every other week and the MC being

Spoiler: Spoiler EP1

turned into a Monster

, while also wanting to join the team that fights them.

Pretty simple show, but pretty impressive Audio/Bass imo.

just checked on youtube. guess i get what you after

 

[Heinrich]

It's not a FR or RTA like the ones I shown above.

It's a SPL Log to show the dynamic range of the content / what my system reproduces over the 3 minutes of the beginning of the Show I've talked about, since the RTA doesn't show the peak values/dynamics properly.

Or did you mean something else by your comment, that I'm missing?

Sorry, I didn't get the meaning of the graph.

 

[Curvature]

RTA peak:

The Full infrasonic response is taken advantage of in this show and the mix is absurd, but quite enjoyable, haha

You likely aren't hearing infrasonics. They are probably masked by higher frequencies.
https://www.audiosciencereview.com/...bwoofer-comparison.20494/page-60#post-2306475