• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Integrating a sub with JBL 4312Gs for mixing: bass management, room EQ, amp choice

feralhogs

New Member
Joined
Sep 29, 2026
Messages
2
Likes
0
Setting up a pair of JBL 4312Gs in a 15' x 12' x 8' room for daily listening and music production. I need an amp and a sub, under $2k combined, used is fine. I'm buying a UMIK-1 and will measure with REW, and I'm open to DSP and room EQ.

Current signal chain is PC > Scarlett 2i2 3rd gen, 2 balanced TRS outs.

Questions!
  1. Amp: which well-measured amps have plenty of headroom for these speakers? I listen loud and don't need features.
  2. Sub: fast, low-distortion options in budget that have measurement data. Music ranges from hip-hop to ambient.
  3. Bass management: run the 4312Gs full range with the sub underneath, or high-pass them and give the low end to the sub? No strong opinion yet. My intuition says full range, but I'd like to hear the tradeoffs for mixing accuracy specifically.
  4. Where to put the crossover and EQ: the 2i2's limited outputs are the constraint. Would a miniDSP-type box (e.g., 2x4 HD) between the interface and the amp and sub be worth the money compared with using the sub's built-in DSP?
Room: LVT floor, drywall, two exterior walls (brick with drywall), a mirrored closet wall behind the listening position. Plan attached.

Thank you all in advance! So, so excited to plug my new speakers in and upgrade from my KRK Rokit 3s!!!
 

Attachments

  • preview (1).png
    preview (1).png
    86.7 KB · Views: 44
Setting up a pair of JBL 4312Gs in a 15' x 12' x 8' room for daily listening and music production. I need an amp and a sub, under $2k combined, used is fine. I'm buying a UMIK-1 and will measure with REW, and I'm open to DSP and room EQ.

Current signal chain is PC > Scarlett 2i2 3rd gen, 2 balanced TRS outs.

Questions!
  1. Amp: which well-measured amps have plenty of headroom for these speakers? I listen loud and don't need features.
  2. Sub: fast, low-distortion options in budget that have measurement data. Music ranges from hip-hop to ambient.
  3. Bass management: run the 4312Gs full range with the sub underneath, or high-pass them and give the low end to the sub? No strong opinion yet. My intuition says full range, but I'd like to hear the tradeoffs for mixing accuracy specifically.
  4. Where to put the crossover and EQ: the 2i2's limited outputs are the constraint. Would a miniDSP-type box (e.g., 2x4 HD) between the interface and the amp and sub be worth the money compared with using the sub's built-in DSP?
Room: LVT floor, drywall, two exterior walls (brick with drywall), a mirrored closet wall behind the listening position. Plan attached.

Thank you all in advance! So, so excited to plug my new speakers in and upgrade from my KRK Rokit 3s!!!
Amp - 3e Audio A5 Stereo Amplifier
Sub (two of this @ $339 for one) - RSL Speedwoofer 10E
 
I'm not familiar with your hardware, but since you are already using a PC, if you want to do some DIY, consider using CamillaDSP. Looks like you're already going to UMIK-1 and REW. Here's an example of time aligning sub to L + R main speakers, followed by generating FIR in DecayCore.

And the procedure in REW to integrate sub using REW:
This procedure will indicate what crossover frequency is best for your system.
 
Gladly! If I were buying everything brand‑new, I’d go with:

Scarlett 4i4 (Gen 4) – $299.99
Perfect Soup (Project Studio license) – $199
2 × SB‑1000 Pro subs – $599.99 each
Beyerdynamic mm1 calibration mic – $211.00

If used was an option, I'd get Audient EVO 16 and 2 or 4 subs depending on what I can find.
Getting an EVO 16 gives you room for expansion if you ever want to have more than 2 subs.

Ideally you'd want balanced inputs and un-ported subs, but I think that's a tough ask at this price point.

I can guarantee you Perfect Soup is going to sound miles ahead of anything that can be done by hand using REW, and even more so as you start adding more speakers to the system. It also removes the headache of endless parameter tweaking. Additionally, it's made for music production and loads directly in your DAW, has auto-render bypass (not supported in some DAWs), level matched bypass, etc.
Also some upcoming features:
Snapshots (so you can have different calibrations/ presets / different sets of monitors)
Built-in headphone profiles
System wide correction (you can also run it this way if your DAW doesn't support auto bypass)

You can also join us on discord https://discord.gg/h4XffN4ppN and see what other users think.
 
Gladly! If I were buying everything brand‑new, I’d go with:

Scarlett 4i4 (Gen 4) – $299.99
Perfect Soup (Project Studio license) – $199
2 × SB‑1000 Pro subs – $599.99 each
Beyerdynamic mm1 calibration mic – $211.00

If used was an option, I'd get Audient EVO 16 and 2 or 4 subs depending on what I can find.
Getting an EVO 16 gives you room for expansion if you ever want to have more than 2 subs.

Ideally you'd want balanced inputs and un-ported subs, but I think that's a tough ask at this price point.

I can guarantee you Perfect Soup is going to sound miles ahead of anything that can be done by hand using REW, and even more so as you start adding more speakers to the system. It also removes the headache of endless parameter tweaking. Additionally, it's made for music production and loads directly in your DAW, has auto-render bypass (not supported in some DAWs), level matched bypass, etc.
Also some upcoming features:
Snapshots (so you can have different calibrations/ presets / different sets of monitors)
Built-in headphone profiles
System wide correction (you can also run it this way if your DAW doesn't support auto bypass)

You can also join us on discord https://discord.gg/h4XffN4ppN and see what other users think.
@feralhogs here you go
 
Back
Top Bottom