pogo
Major Contributor
- Joined
- Sep 4, 2020
- Messages
- 2,497
- Likes
- 977
Which implementations use all connections of the four-pole output of the purifi module?
The output impedance of 1ET9040BA is significantly lower than the resistance of even a single high quality output binding post. To derive the greatest benefit of the ultra-low output impedance, 1ET9040BA is fitted with a four-pole output connector which permits bi-wiring. This prevents load dependent currents from e.g. the bass section of a speaker from impacting the mid/tweeter section. 1ET9040BA’s ultra-low output impedance offers a degree of isolation that can otherwise only be matched by full bi-amping. <-- datasheet
Speaker connectors for bi-wiring should also be available and the PSU should support the maximum possible output power of the module(s).
The output impedance of 1ET9040BA is significantly lower than the resistance of even a single high quality output binding post. To derive the greatest benefit of the ultra-low output impedance, 1ET9040BA is fitted with a four-pole output connector which permits bi-wiring. This prevents load dependent currents from e.g. the bass section of a speaker from impacting the mid/tweeter section. 1ET9040BA’s ultra-low output impedance offers a degree of isolation that can otherwise only be matched by full bi-amping. <-- datasheet
Speaker connectors for bi-wiring should also be available and the PSU should support the maximum possible output power of the module(s).
Last edited:
