zerowalker
Member
- Joined
- Mar 22, 2019
- Messages
- 9
- Likes
- 2
Hi, i have been wanting to clean up my DAC/AMP set a bit.
Or well i say clean it, but it's just gonna be pushed beside my monitor anyway,
but currently the cabling is kinda bulky, the D30 outputs 2 RCA and the O2 takes in 3mm.
So i got a 2xRCA->3mm, but i think i would prefer just 2xRCA to have it a bit simpler, think i can have them really short then as well.
Currently they are like this (don't get jealous of the dust):
![20210214_150145[2].jpg 20210214_150145[2].jpg](https://audiosciencereview.com/forum/data/attachments/112/112470-92744bc19b460fddd068c0831b818ad7.jpg)
I guess the setup is what's most messed up, but not sure much can be done there,
PC is to the right and me to the front, so one cable has to take the fall.
So i as i don't know anything about what's available or how one might typical solve these kinds of setups i am asking here.
I am willing to look at another amp if that's what it might take.
As for moving them, the amp is probably a no go, not sure where i would have it without messing up my headphone cabling.
The DAC perhaps, but it's really not much space anywhere except where they are, and i really like if i can have them on each other,
if possible i would even like to have some kind of tape that glued them together somehow, cause it's a bit annoying that the amp can glide if i move the cables a bit;P
Sorry for the totally random question, and probably not the appropriate forum place now that i think about it.
Or well i say clean it, but it's just gonna be pushed beside my monitor anyway,
but currently the cabling is kinda bulky, the D30 outputs 2 RCA and the O2 takes in 3mm.
So i got a 2xRCA->3mm, but i think i would prefer just 2xRCA to have it a bit simpler, think i can have them really short then as well.
Currently they are like this (don't get jealous of the dust):
![20210214_150145[2].jpg 20210214_150145[2].jpg](https://audiosciencereview.com/forum/data/attachments/112/112470-92744bc19b460fddd068c0831b818ad7.jpg)
I guess the setup is what's most messed up, but not sure much can be done there,
PC is to the right and me to the front, so one cable has to take the fall.
So i as i don't know anything about what's available or how one might typical solve these kinds of setups i am asking here.
I am willing to look at another amp if that's what it might take.
As for moving them, the amp is probably a no go, not sure where i would have it without messing up my headphone cabling.
The DAC perhaps, but it's really not much space anywhere except where they are, and i really like if i can have them on each other,
if possible i would even like to have some kind of tape that glued them together somehow, cause it's a bit annoying that the amp can glide if i move the cables a bit;P
Sorry for the totally random question, and probably not the appropriate forum place now that i think about it.