• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

how to hook up a genelec dsp speaker 8341a

Unfortunely Nuprime H16-AES is lack of hdmi 2.1 passthrough like a common feature of modern av receiver
You can do the following:

Various HDMI sources -> HDMI -> TV -> HDMI eARC -> Nuprime

That way, it doesn't matter what HDMI version the Nuprime supports. All your source devices will be connected directly to the TV.
 
You can do the following:

Various HDMI sources -> HDMI -> TV -> HDMI eARC -> Nuprime

That way, it doesn't matter what HDMI version the Nuprime supports. All your source devices will be connected directly to the TV.
thank you so much

If pc output hdmi 2.1 to hdmi 2.1 of tv,then go to numpire. That is total two step path to transfer audio.
Do you think it will cause sound lip sync issue as my post said?

I encounted lip sync and pause play control latency issue,can you give a suggestion?

2.some review of genelec dsp speaker said there will be lip sync delay when using dsp series speaker for video editing.
I am wondering why av receiver not have same issue cause they all built in dsp.

3.my av receive had two hdmi out but these two hdmi port are video mirror when there is hdmi input be detected.
is there any av processor which has independent hdmi out for connecting individual display?
 
I don't.


Amir measured the 8361A's processing delay at 5ms.

There's no way that causes perceptible desync.
Hi
I have a two way 6.5inch bass driver jbl 4309 speaker with mrx740 amp driving.
Does 8341 three way coxial speaker sound better than 4309?
I mean more punchy and deeper bass.
Why doesnt combine woofer,mid and twetter driver into coxial unit,but with mid and twetter only?
I used to hear radio with mid frenquency only.The 4309 play mid range audio dialogue with some extra viration bass,it could be coming from vocal fold
does three speaker not have this issue?
As you mention above,a nuprime hdmi aes adapter can decode dts hd ma.
Does it have accuracy as av amp?can you feel the difference with surround audio decodingbetween dsp of av amp and numpime?
thankyou
 
thank you so much

If pc output hdmi 2.1 to hdmi 2.1 of tv,then go to numpire. That is total two step path to transfer audio.
Do you think it will cause sound lip sync issue as my post said?

I encounted lip sync and pause play control latency issue,can you give a suggestion?

2.some review of genelec dsp speaker said there will be lip sync delay when using dsp series speaker for video editing.
I am wondering why av receiver not have same issue cause they all built in dsp.

3.my av receive had two hdmi out but these two hdmi port are video mirror when there is hdmi input be detected.
is there any av processor which has independent hdmi out for connecting individual display?
AV receiver will delay video to cover its processing time. It’s part of the HDMI standard.

I’m not aware of any AV which can route 2 independent video signals. If one exists it would probably be very costly.
 
Hi
I have a two way 6.5inch bass driver jbl 4309 speaker with mrx740 amp driving.
Does 8341 three way coxial speaker sound better than 4309?
I mean more punchy and deeper bass.
Why doesnt combine woofer,mid and twetter driver into coxial unit,but with mid and twetter only?
I used to hear radio with mid frenquency only.The 4309 play mid range audio dialogue with some extra viration bass,it could be coming from vocal fold
does three speaker not have this issue?
As you mention above,a nuprime hdmi aes adapter can decode dts hd ma.
Does it have accuracy as av amp?can you feel the difference with surround audio decodingbetween dsp of av amp and numpime?
thankyou
Technically the 8341 2 racetrack drivers make it acoustically coaxial. I cannot imagine the complexity of making 3 drivers physically coincident. It has been done before as you will find on the coaxial thread here however probably not very well.
 
Does 8341 three way coxial speaker sound better than 4309?
I mean more punchy and deeper bass.
For bass for Genelec 8341A is Genelec 7370A subwoofer, with GLM hardware calibration tool, for integration of the entire set.
 
Back
Top Bottom