The Purify ones are probably better than almost all class-A and class-AB amps on the market, actually.But class d amplifier is neither as good as class AB nor class A .
The Purify ones are probably better than almost all class-A and class-AB amps on the market, actually.But class d amplifier is neither as good as class AB nor class A .
But class d amplifier is neither as good as class AB nor class A .
And high wattage class AB costs much higher which in case of class A , increases manifold.
budget is max 4k/pairYou don't mention budget.
I have Tune Audio Anima horns, which are 109dB/watt so very efficient.
They sound great to me.View attachment 114979
You don't mention budget.
I have Tune Audio Anima horns, which are 109dB/watt so very efficient.
They sound great to me.View attachment 114979
But class d amplifier is neither as good as class AB nor class A .
Tekton Design makes high sensitivity speakers.
jbl 3732 104dB they have a whole collection from small to extra large with assorted subwoofers.Kindly suggest some good quality high sensitivity speakers .
Thats no longer the case. I encourage you to look at Amir's amplifier index and you will see some class D amps in the top quartile for performance. Also there are amp vendors on this site selling compelling class D amplifiers at competitive prices with class AB in terms of quality with more power.But class d amplifier is neither as good as class AB nor class A .
And high wattage class AB costs much higher which in case of class A , increases manifold.
Patently untrue. Class D is just fine, if you get a half decent amp. Class A is pretty trash for power amp purposes because of the horrid efficiency (and frankly pretty awful distortion characteristics because of the lack of push-pull).But class d amplifier is neither as good as class AB nor class A .
And high wattage class AB costs much higher which in case of class A , increases manifold.
A Class A amplifier doesn't have to be single ended, it can, and most are, push pull. The main issue, apart from shocking inefficiency, is that a true Class A amplifier is very much current limited, and if required to provide high current either goes into Class AB, in which case it's no longer a Class A amplifier, or it can't provide the extra current so distorts horribly.Patently untrue. Class D is just fine, if you get a half decent amp. Class A is pretty trash for power amp purposes because of the horrid efficiency (and frankly pretty awful distortion characteristics because of the lack of push-pull).
budget is max 4k/pair
???High sensitivity speakers play well through low wattage amplifiers . And the low wattage amplifier costs much lesser .
Would love to see them measured, as design-wise I consider them mini-JTR.
I started comparing spec vs measuring sensitivity due to an argument about a Tekton speaker. I know the tweeter model they use, and their spec is much higher than the tweeter’s data sheet, so that high just isn’t possible. And as seen in the Stereophile review(s), they overstate sensitivity.Tekton Design makes high sensitivity speakers.