Help: ARC measurements of my room

[sfdoddsy]

Your response isn't as bad as it looks. The red line is the measured response, the green is after ARC correction.

The dips, as suggested, are room modes.

I would lower the maximum correction to 600Hz, which will increase the resolution of the corrections.

It's purely personal, but I'd lower the room gain a bit as well.

If all this is too techie, just switch ARC to Auto and let it do its thing.

You don't need to tweak to get a great result.

 

[veeceem]

Your response isn't as bad as it looks. The red line is the measured response, the green is after ARC correction.

The dips, as suggested, are room modes.

I would lower the maximum correction to 600Hz, which will increase the resolution of the corrections.

It's purely personal, but I'd lower the room gain a bit as well.

If all this is too techie, just switch ARC to Auto and let it do its thing.

You don't need to tweak to get a great result.

Yeah too techie I should just set correction to 600hz max and leave the calculation to ARC thanks

 

[veeceem]

https://www.soundstageaccess.com/in...-on-subwoofer-integration-and-room-correction
An ARC interview Q&A. In case somebody cares

 

[veeceem]

My lastest measurement of ARC after remove some acoustic panel.
Can someone take a look and tell me if this is considered better or worse?
Thanks

 

[veeceem]