HEDD Type 05 Mk2 vs Genelec 8030

[Music1969]

This is excellent (compared with Genelec 8030)

Korean website via Google Translate

HEDD TYPE 05 MK2, 모니터 스피커 측정 리뷰 Feat. 제네렉 8030C - 영디비

효율만 고집하던 애플뮤직도 고음질 무손실 음원을 지원할 정도로 세상이 바뀌었습니다. 언제까지 20kHz까지만 지원하는 다이나믹 트위터가 달린 스피커로 모니터하실래요? 신생 모니터 스피커 회사 HEDD가 엄청난 스...

www-0db-co-kr.translate.goog

 

[voodooless]

Sadly no off-axis measurements. It also has significant resonances if you leave the port open.

 

[YSC]

I wonders why the port closed have even better low frequency extension

 

[voodooless]

I wonders why the port closed have even better low frequency extension

Because there is more going on than just closing the port:

 

[JSmith]

There are no details in the review about the measurement system used... and it 'aint a Klippel setup that's for sure.


JSmith

 

[Music1969]

Sadly no off-axis measurements.

Is it really important when sitting 1m away ?

4m away I can understand yes, off-axis very important.

 

[Music1969]

There are no details in the review about the measurement system used... and it 'aint a Klippel setup that's for sure.


JSmith

did you watch the video linked in the page?

 

[YSC]

Because there is more going on than just closing the port:

Ah, I see then, but then I wonder again... if the port is blocked and have a corresponding setting to make it flatter, why they still creat that port... for a few dB of headroom?

 

[voodooless]

for a few dB of headroom?

Probably. It can be quite significant. Distortion wise as well.

But it’s also a marketing instrument. They call it CoP (Closed or Ported):

Closed or Ported Speaker Design | HEDD Audio

Handcrafted professional studio monitors and headphones made in Berlin since 2016.

www.hedd.audio

 

[YSC]

Probably. It can be quite significant. Distortion wise as well.

But it’s also a marketing instrument. They call it CoP (Closed or Ported):

Closed or Ported Speaker Design | HEDD Audio

Handcrafted professional studio monitors and headphones made in Berlin since 2016.

www.hedd.audio

Just wonders if set the bass extension to 38hz and plug port what will the measurements be like.