Frequency Response Test Records

[Balle Clorin]

SFC-TR100 vs CA-TRS1007, Denon XG-7001, Denon XL-7001, Ortofon-TR

cartridge - Karat DV, retipped, 2.5mm cantilever + ML Stylus

Now you made me buy the Technics SFC-TR100 too….

 

[Balle Clorin]

her is my Technics SFC-100 test record, 20 HZ LOW FILTER

AT OC9MLII WITH AND WITHOUT 20 LOW FILTER

oc9MLII no filter both channels

I will say this is s very good test record for sweep confirmed by Dynavector Karat.
Only thing I can see wrong is the blipp at14k in right channel,, same for 2 systems so probably record. Will try some local washing..

 

[mackat]

Now you made me buy the Technics SFC-TR100 too….

Just picked up one as well!

 

[JP]

 

[Balle Clorin]

Wow , it even have the same blip in the right channel above 10k …,no hope to fix that then, it is in the record.

@JP, I guess you did start collecting a loong time a go… I kind of regret not picking up things earlier , but then I realise I had enough other expenses …buying more than a AT95E was kind of crazy..

 

[aaaakkkk]

Now you made me buy the Technics SFC-TR100 too….

Now I'm obsessed with using 16 speed. You don't have a 16 speed player?

 

[Balle Clorin]

My father at 91 uses a 1962 Garrard with 16 2/3.. I do not see the point of that speed

 

[sergeauckland]

My father at 91 uses a 1962 Garrard with 16 2/3.. I do not see the point of that speed

You would if you had been blind in the 1950s. That speed was used for Talking Books for the Blind. I recall it was also used for other speech based audio, plays and the like. Talking books were an early use for cassettes, then CDs.

S

 

[mackat]

Got my SFC-TR100 today! Here's two measurements I just took. It's interesting that the blip in the right channel isn't visible on the AT33PTG2.

I am wondering what is going on with crosstalk at 1k, as I don't see that in either measurement previously posted here.

I'm using TRS-1007 settings, except for having to manually split the files.

My copy is a bit warped, but I'm not sure if that would have anything to do with it.

 

[Balle Clorin]

You are lucky you do not have the blipp at 15k!mus be another pressing..maybe I should by a second… what does your matrix say?

If you edit the start too early 1khz can bleed in..

 

[aaaakkkk]

Got my SFC-TR100 today! Here's two measurements I just took. It's interesting that the blip in the right channel isn't visible on the AT33PTG2.

I am wondering what is going on with crosstalk at 1k, as I don't see that in either measurement previously posted here.

I'm using TRS-1007 settings, except for having to manually split the files.

My copy is a bit warped, but I'm not sure if that would have anything to do with it.

View attachment 521535View attachment 521534

Have you tried playing it at 45 RPM? I wonder what will happen to this artifact? Will it shift or disappear?

 

[Balle Clorin]

I tried t0 shift the 13k, by running higher speed,.byt at 45 rpm in only go to 17250 hz, and eq below 2000 becomes wrong

I need a 78rpm truntable....

 

[mackat]

Have you tried playing it at 45 RPM? I wonder what will happen to this artifact? Will it shift or disappear?

Not yet, but I will try it.

 

[mackat]

It looks like the weird crosstalk at 1 kHz was indeed due to me not manually editing out the 1k tone fully.

 

[Balle Clorin]

As I wrote.. Happens to me to. You are lucky with your record, no blip

 

[mackat]

There seems to be about a 1 dB channel imbalance starting at ~12 kHz on my SFC-TR100 which is reproducible across different cartridges (though not all).

 

[Balle Clorin]

Got my SFC-TR100 today! Here's two measurements I just took. It's interesting that the blip in the right channel isn't visible on the AT33PTG2.

I am wondering what is going on with crosstalk at 1k, as I don't see that in either measurement previously posted here.

I'm using TRS-1007 settings, except for having to manually split the files.

My copy is a bit warped, but I'm not sure if that would have anything to do with it.

View attachment 521535View attachment 521534

Which version in yours? Issue 2?

 

[Balle Clorin]

SFC-TR100 vs CA-TRS1007, Denon XG-7001, Denon XL-7001, Ortofon-TR

cartridge - Karat DV, retipped, 2.5mm cantilever + ML Stylus

Which SFC-TR100? Issue 2?

 

[mackat]

Which version in yours? Issue 2?
View attachment 524801

I will check tonight

 

[aaaakkkk]

Which SFC-TR100? Issue 2?
View attachment 524802