Eversolo Dac Z10 @ Purité Audio

[Purité Audio]

Just ordered our first Eversolo Dac Z10 units UK RRp is £1940 inc vat and delivery.
Highlights:-

• Fully Isolated Architecture (FIA™), which completely separates the digital and analogue domains to minimise interference and preserve signal purity.
• Three independent linear power supplies individually power the left channel, system, and right channel, allowing each to operate in an ultra-low-noise environment.
• Two sets of AK4191 + AK4499 DACs for independent left and right channels - AKM’s Velvet Sound™.
• Fully balanced analogue preamplifier that employs precise dual-channel R2R volume control.
• Eversolo Precision Core™ OCXO Temperature-Controlled Crystal Oscillator + Phase-Locked Loop Technology with External 10 MHz & 25 MHz High-Precision Clock Support.
• FPGA Redefined - A built-in FPGA that shapes IIS data and refines the clock. Every digital signal is thus optimised to its purest form before reaching the DAC.
• Grounding Post - The grounding post channels noise away, eliminating even minor interference and preserving the purity of each note.
• 8-Mode IIS Digital Audio Input - Via IIS digital audio input, offers 8 switchable modes and supports up to 768kHz/ 32Bit PCM and DSD512 Native.
• Isolated AES/EBU Input - Features a dedicated isolated AES/EBU input, fully separating electrical noise between front-end and back-end devices.
• HDMI ARC Integration - Equipped with HDMI ARC, supporting both ARC and eARC modes for effortless integration into your home theatre system.
• 6.35mm Powerful Headphone Amplifier Module - Dedicated 6.35 mm headphone amplifier module that auto-detects impedance and adjusts gain.
• High Quality Bluetooth Module - Features a built-in Qualcomm QCC5125 Bluetooth module.
• 8.8-inch IPS touchscreen.
• Left/Right Balance Gain - Offers up to 15dB of left/right balance gain adjustment.
• Customise Your Sound - Offers 6 DAC filter characteristics, letting you switch freely to suit different musical atmospheres.
• Full Function Remote Control.
• High Quality USB and Trigger Cables Included.
• Much more here,
• https://www.eversolo.com/Product/index/model/DAC-Z10/target/XIffD4sPvkjeq7k9e[ld]3ulg==.html#/

Keith

 

[Sonic-Wall]

…but Eversolo missed to add a PEQ :-(

 

[Purité Audio]

Yes you have to get the T8 for that, pity.
Keith

 

[TheKoC]

…but Eversolo missed to add a PEQ :-(

but instead 3 independent power supplies, much more useful

 

[Benz G1L]

Can its IIS switchable modes be programmed to accept a native DSD signal through HDMI (from a compatible SACD transport or universal player)? Does the preamp section also include an HT bypass?

 

[kandamrgam]

Just ordered our first Eversolo Dac Z10 units UK RRp is £1940 inc vat and delivery.
Highlights:-

• Fully Isolated Architecture (FIA™), which completely separates the digital and analogue domains to minimise interference and preserve signal purity.
• Three independent linear power supplies individually power the left channel, system, and right channel, allowing each to operate in an ultra-low-noise environment.
• Two sets of AK4191 + AK4499 DACs for independent left and right channels - AKM’s Velvet Sound™.
• Fully balanced analogue preamplifier that employs precise dual-channel R2R volume control.
• Eversolo Precision Core™ OCXO Temperature-Controlled Crystal Oscillator + Phase-Locked Loop Technology with External 10 MHz & 25 MHz High-Precision Clock Support.
• FPGA Redefined - A built-in FPGA that shapes IIS data and refines the clock. Every digital signal is thus optimised to its purest form before reaching the DAC.
• Grounding Post - The grounding post channels noise away, eliminating even minor interference and preserving the purity of each note.
• 8-Mode IIS Digital Audio Input - Via IIS digital audio input, offers 8 switchable modes and supports up to 768kHz/ 32Bit PCM and DSD512 Native.
• Isolated AES/EBU Input - Features a dedicated isolated AES/EBU input, fully separating electrical noise between front-end and back-end devices.
• HDMI ARC Integration - Equipped with HDMI ARC, supporting both ARC and eARC modes for effortless integration into your home theatre system.
• 6.35mm Powerful Headphone Amplifier Module - Dedicated 6.35 mm headphone amplifier module that auto-detects impedance and adjusts gain.
• High Quality Bluetooth Module - Features a built-in Qualcomm QCC5125 Bluetooth module.
• 8.8-inch IPS touchscreen.
• Left/Right Balance Gain - Offers up to 15dB of left/right balance gain adjustment.
• Customise Your Sound - Offers 6 DAC filter characteristics, letting you switch freely to suit different musical atmospheres.
• Full Function Remote Control.
• High Quality USB and Trigger Cables Included.
• Much more here,
• https://www.eversolo.com/Product/index/model/DAC-Z10/target/XIffD4sPvkjeq7k9e[ld]3ulg==.html#/

Keith

What is the headphone power output in Watts?

 

[Purité Audio]

Output Level (Vrms): 4Vrms @ 0dBFS


THD+N @ No-wt: 0.0003% @ 1kHz (-110dB @ 1kHz)


Noise @ No-wt: < 2.5uVrms


SNR @ A-wt: 124dB


Frequency Response: 20Hz–20kHz (±0.1dB)


DNR @ A-wt: 124dB


Headphone Audio


Characteristics


(Mid Gain Mode)


Output Level (Vrms): 5.6 Vrms @ 0dBFS


THD+N @ No-wt: 0.00018% @ 1kHz (-115 dB @ 1kHz)


Noise @ No-wt: <2.5 µVrms


SNR @ A-wt: 126 dB


Frequency Response: 20Hz–20kHz (±0.1 dB)


DNR @ A-wt: 126 dB


Headphone Audio


Characteristics


(High Gain Mode)


Output Level (Vrms): 7 Vrms @ 0dBFS


THD+N @ No-wt: 0.00013% @ 1kHz (-118 dB @ 1kHz)


Noise @ No-wt: <2.5 µVrms


SNR @ A-wt: 127 dB


Frequency Response: 20Hz–20kHz (±0.1 dB)

I will share the whole Z-10 manual as soon as I am allowed .

Keith

 

[Benz G1L]

Output Level (Vrms): 4Vrms @ 0dBFS


THD+N @ No-wt: 0.0003% @ 1kHz (-110dB @ 1kHz)


Noise @ No-wt: < 2.5uVrms


SNR @ A-wt: 124dB


Frequency Response: 20Hz–20kHz (±0.1dB)


DNR @ A-wt: 124dB


Headphone Audio


Characteristics


(Mid Gain Mode)


Output Level (Vrms): 5.6 Vrms @ 0dBFS


THD+N @ No-wt: 0.00018% @ 1kHz (-115 dB @ 1kHz)


Noise @ No-wt: <2.5 µVrms


SNR @ A-wt: 126 dB


Frequency Response: 20Hz–20kHz (±0.1 dB)


DNR @ A-wt: 126 dB


Headphone Audio


Characteristics


(High Gain Mode)


Output Level (Vrms): 7 Vrms @ 0dBFS


THD+N @ No-wt: 0.00013% @ 1kHz (-118 dB @ 1kHz)


Noise @ No-wt: <2.5 µVrms


SNR @ A-wt: 127 dB


Frequency Response: 20Hz–20kHz (±0.1 dB)

I will share the whole Z-10 manual.

Keith

So should I assume that you don’t know the answers to my own questions?

 

[Purité Audio]

I am not allowed to share the whole manual, above is the relevant headphone section.
This is the specs page.

Keith

 

[Benz G1L]

I am not allowed to share the whole manual, above is the relevant headphone section.
Keith

OK so let me simply repeat my questions, which are very basic applications from the unit:
Can its IIS switchable modes be programmed to accept a native DSD signal through HDMI (from a compatible SACD transport or universal player)? Does the preamp section also include an HT bypass?

 

[Purité Audio]

Probably a question for ‘Zidoo support-Kim’ over at the Zidoo forum or member ‘Eversolo’ here.

Problem with EM-01 microphone.

Hi, I bought this microphone and trying connect it to my phone Samsung Galaxy S24 Ultra. When Eversolo connect don't recognized it, I installed USB...

forum.zidoo.tv

Keith

 

[Purité Audio]

Added a DAC-Z10 page to the PA site, nothing on it that isn’t on the Eversolo site, rrp is going to be £1940 which includes vat and delivery.
Should be available soon.

Eversolo DAC-Z10 at Purité Audio London

Purité Audio,Hi-Fi retailer London,UK, EVERSOLO DAC-Z10 ,Eversolo T8, AMP-F10 power amplifier. £2199.00 available now. , Eversolo DMP-A10 price £1850.00 available now, Eversolo AMP-D10 £3580 available now. Purité Audio, London 's leading Hi-Fi retailer.

www.puriteaudio.co.uk

 

[Purité Audio]

In case you mislaid it!
Keith

 

[Purité Audio]

Arrives this afternoon!

Eversolo DAC-Z10 at Purité Audio London

Purité Audio,Hi-Fi retailer London,UK, EVERSOLO DAC-Z10 ,Eversolo T8, AMP-F10 power amplifier. £2199.00 available now. , Eversolo DMP-A10 price £1850.00 available now, Eversolo AMP-D10 £3580 available now. Purité Audio, London 's leading Hi-Fi retailer.

www.puriteaudio.co.uk

Keith

 

[Purité Audio]

Because you just absolutely need multiple boxes to stream!

 

[Purité Audio]

Twice the cost, takes up twice the space, but of course the sound quality is exponentially better!

 

[Purité Audio]

The weather here just as gloomy as yesterday, rear shot, Z10 comes with a USB and trigger cable and the ‘smart’ chrome remote.
I have used the USB connection, when you choose ‘USB dac’ on the T8 output goes straight to 100% ( although you can adjust) and the Z10 handles attenuation, trigger cable connected everything works flawlessly which has been my experience with every ‘streamer’ product I have tried AMP-F10 still on probation.

 

[Purité Audio]

Having the two boxes does increase ( for me) the flexibility, I can have the active speakers connected to the T8, digital/AES out and use the T8 to attenuate and stream, which is a neat one box system.
Roon sees the T8, I can use the Z10 directly connected to my Roon box, TV via its optical and with passive speakers output to my Boxem amplifiers.
Obviously no improvement in SQ but they are smart , the Z10 also has analogue ‘ins’ which might be useful.
if the two components had been the same size that might have been neat,
Keith