Eversolo Dac Z10 @ Purité Audio

[Purité Audio]

Just ordered our first Eversolo Dac Z10 units UK RRp is £1940 inc vat and delivery.
Highlights:-

• Fully Isolated Architecture (FIA™), which completely separates the digital and analogue domains to minimise interference and preserve signal purity.
• Three independent linear power supplies individually power the left channel, system, and right channel, allowing each to operate in an ultra-low-noise environment.
• Two sets of AK4191 + AK4499 DACs for independent left and right channels - AKM’s Velvet Sound™.
• Fully balanced analogue preamplifier that employs precise dual-channel R2R volume control.
• Eversolo Precision Core™ OCXO Temperature-Controlled Crystal Oscillator + Phase-Locked Loop Technology with External 10 MHz & 25 MHz High-Precision Clock Support.
• FPGA Redefined - A built-in FPGA that shapes IIS data and refines the clock. Every digital signal is thus optimised to its purest form before reaching the DAC.
• Grounding Post - The grounding post channels noise away, eliminating even minor interference and preserving the purity of each note.
• 8-Mode IIS Digital Audio Input - Via IIS digital audio input, offers 8 switchable modes and supports up to 768kHz/ 32Bit PCM and DSD512 Native.
• Isolated AES/EBU Input - Features a dedicated isolated AES/EBU input, fully separating electrical noise between front-end and back-end devices.
• HDMI ARC Integration - Equipped with HDMI ARC, supporting both ARC and eARC modes for effortless integration into your home theatre system.
• 6.35mm Powerful Headphone Amplifier Module - Dedicated 6.35 mm headphone amplifier module that auto-detects impedance and adjusts gain.
• High Quality Bluetooth Module - Features a built-in Qualcomm QCC5125 Bluetooth module.
• 8.8-inch IPS touchscreen.
• Left/Right Balance Gain - Offers up to 15dB of left/right balance gain adjustment.
• Customise Your Sound - Offers 6 DAC filter characteristics, letting you switch freely to suit different musical atmospheres.
• Full Function Remote Control.
• High Quality USB and Trigger Cables Included.

Keith

 

[Thighsofsteel]

I am sure that is all fabulous, but existing products are transparent beyond super human hearing, so I, as an Eversolo owner, am a tiny bit unsure where this product sits.

 

[F1Fan72]

Just ordered our first Eversolo Dac Z10 units UK RRp is £1940 inc vat and delivery.
Highlights:-

• Fully Isolated Architecture (FIA™), which completely separates the digital and analogue domains to minimise interference and preserve signal purity.
• Three independent linear power supplies individually power the left channel, system, and right channel, allowing each to operate in an ultra-low-noise environment.
• Two sets of AK4191 + AK4499 DACs for independent left and right channels - AKM’s Velvet Sound™.
• Fully balanced analogue preamplifier that employs precise dual-channel R2R volume control.
• Eversolo Precision Core™ OCXO Temperature-Controlled Crystal Oscillator + Phase-Locked Loop Technology with External 10 MHz & 25 MHz High-Precision Clock Support.
• FPGA Redefined - A built-in FPGA that shapes IIS data and refines the clock. Every digital signal is thus optimised to its purest form before reaching the DAC.
• Grounding Post - The grounding post channels noise away, eliminating even minor interference and preserving the purity of each note.
• 8-Mode IIS Digital Audio Input - Via IIS digital audio input, offers 8 switchable modes and supports up to 768kHz/ 32Bit PCM and DSD512 Native.
• Isolated AES/EBU Input - Features a dedicated isolated AES/EBU input, fully separating electrical noise between front-end and back-end devices.
• HDMI ARC Integration - Equipped with HDMI ARC, supporting both ARC and eARC modes for effortless integration into your home theatre system.
• 6.35mm Powerful Headphone Amplifier Module - Dedicated 6.35 mm headphone amplifier module that auto-detects impedance and adjusts gain.
• High Quality Bluetooth Module - Features a built-in Qualcomm QCC5125 Bluetooth module.
• 8.8-inch IPS touchscreen.
• Left/Right Balance Gain - Offers up to 15dB of left/right balance gain adjustment.
• Customise Your Sound - Offers 6 DAC filter characteristics, letting you switch freely to suit different musical atmospheres.
• Full Function Remote Control.
• High Quality USB and Trigger Cables Included.

Keith

Great! So looking forward to seeing one of these ..

 

[Purité Audio]

I am sure that is all fabulous, but existing products are transparent beyond super human hearing, so I, as an Eversolo owner, am a tiny bit unsure where this product sits.

Right at the top of the most expensive dacs that Eversolo makes list!
Keith

 

[F1Fan72]

 

[ErVikingo]

is it better than a cheap DAC?

 

[F1Fan72]

is it better than a cheap DAC?

Depends on the cheap DAC

 

[Purité Audio]

is it better than a cheap DAC?

Of course it’s much more expensive

 

[ppierre]

8.8 inches is a goud sized argument !

 

[WeekendWarrior]

Just ordered our first Eversolo Dac Z10 units UK RRp is £1940 inc vat and delivery.
Highlights:-

• Fully Isolated Architecture (FIA™), which completely separates the digital and analogue domains to minimise interference and preserve signal purity.
• Three independent linear power supplies individually power the left channel, system, and right channel, allowing each to operate in an ultra-low-noise environment.
• Two sets of AK4191 + AK4499 DACs for independent left and right channels - AKM’s Velvet Sound™.
• Fully balanced analogue preamplifier that employs precise dual-channel R2R volume control.
• Eversolo Precision Core™ OCXO Temperature-Controlled Crystal Oscillator + Phase-Locked Loop Technology with External 10 MHz & 25 MHz High-Precision Clock Support.
• FPGA Redefined - A built-in FPGA that shapes IIS data and refines the clock. Every digital signal is thus optimised to its purest form before reaching the DAC.
• Grounding Post - The grounding post channels noise away, eliminating even minor interference and preserving the purity of each note.
• 8-Mode IIS Digital Audio Input - Via IIS digital audio input, offers 8 switchable modes and supports up to 768kHz/ 32Bit PCM and DSD512 Native.
• Isolated AES/EBU Input - Features a dedicated isolated AES/EBU input, fully separating electrical noise between front-end and back-end devices.
• HDMI ARC Integration - Equipped with HDMI ARC, supporting both ARC and eARC modes for effortless integration into your home theatre system.
• 6.35mm Powerful Headphone Amplifier Module - Dedicated 6.35 mm headphone amplifier module that auto-detects impedance and adjusts gain.
• High Quality Bluetooth Module - Features a built-in Qualcomm QCC5125 Bluetooth module.
• 8.8-inch IPS touchscreen.
• Left/Right Balance Gain - Offers up to 15dB of left/right balance gain adjustment.
• Customise Your Sound - Offers 6 DAC filter characteristics, letting you switch freely to suit different musical atmospheres.
• Full Function Remote Control.
• High Quality USB and Trigger Cables Included.

Keith

Dual subwoofer integration?

 

[Benz G1L]

Wondering if its 8 mode configuration IIS input can be switched to accept DSD through an SACD transport (such as my Sony XA5400ES). I'm presently enoying this feature through my Bryston BDA-3 DAC.