• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Equalized vs non-equalized headphones

But with EQ enabled, the signal will be about 6 dB quieter than with EQ off. He should create one flat (no-EQ) profile that applies a similar ~6 dB attenuation, and then switch between that and the EQ profile.

No wonder he has trouble picking out EQ on or off. X2HR is preety good out of the box.


View attachment 485952
Good call. And you're right that the adjustments are pretty small on this headphone. Listening for small changes in the treble is pretty tricky when you're using music. Agree that this thread is not surprising with this context.
 
Is it also this difficult with the HIFIMAN Edition XS to tell when the equalizer is on or off?
 
No, with Hifiman's it would be obvious: much more bass after EQ and filled in 1-3kHz where the hearing is very sensitive.

1761664904785.png


While on Fidelio bass is weak even after EQ and the biggest change is around 5kHz, a very narrow peak. This should still be audible, but not transforming.

1761665036880.png
 
Yes, the HIFIMAN Edition XS — but how can I make a fair comparison if the preamplifier is in the middle and affects the result?
 
Is this setup fine like this?
 

Attachments

  • eq on 8.png
    eq on 8.png
    107.4 KB · Views: 88
  • eq off .png
    eq off .png
    114.6 KB · Views: 64
Back
Top Bottom