Indeed these are mine! What you are seeing in the pic is the center channel (left) and one of the mains (right). Not to scale by the way, main is much larger.
Total system cost (mains, center, sides, and coax height channels) $30k. Note the mains, center, and sides are all full range cardioid. Mains also have remote selectable variable directivity (via DSP) … three modes … “narrow” which is similar to coax dispersion, wide (think huge holographic soundstage like Salon 2 or a large dipole planar), and finally a “pseudo” omni (or “concert hall” as Soundfield calls it, similar to something like MBL). These DSP directivity modes are very effective and must be heard to be believed.
As to Sigberg comment … I guess you get that from the side slots on midrange head? This is needed for cardioid dispersion, has nothing to do with the “looks” of Sigberg. Form follows function.
On the Wilson observation, maybe a bit of a physical resemblance, but that is where the similarities end
System expected to ship by end of this week!
Curious, given that they’re bespoke why wouldn’t the center be the same as left/right!?Indeed these are mine! What you are seeing in the pic is the center channel (left) and one of the mains (right). Not to scale by the way, main is much larger.
6 coax heights… and yup, even though generally speaking a lot of money, for what I am getting it is a great price. Soundfield has very reasonable pricing to begin with, plus it helps to be purchasing directly from manufacturer, no dealer mark-uphow many coax heights are you getting?
wow 30k is steal for those speakers, considering the kef blade 2 goes for 25k a pair
you are getting full 5 bed layer and atmos custom built speakers with dsp many options for directivity multiple drivers in each speaker,
i wonder what the crossover in the mains look like.
You got that right! Though been a multi year quest at this point, I can wait a bit longer"System expected to ship by end of this week!"
you miss feel like a 10 year old on xmas eve
Correct, front will be below raised panel, or behind acoustically transparent screen (if I go with front projector, still TBD)Awesome!
Took me a while to figure out they were 2 separate photos and the speakers are not side by side.
Are you using a projector or panel? The center looks quite tall - presume front stage will be under the screen?
Great question … first, really no benefit to be exact duplicate, mains flat to 20Hz, center 40Hz. For midrange and up it is a 100% acoustic match to mains. Plus I wanted a slightly smaller form factor as will have equipment racks on each side, and the mains are very big (that’s a 14” and a 15” driver in those mains)Curious, given that they’re bespoke why wouldn’t the center be the same as left/right!?
Thanks, have really appreciated your comments during the journey! Yeah, I fully expect some will not like the looks, totally understand. As I have stated prior, I am not a “speakers should look like furniture” person, they are a means to an end for me, rather they not call attention to themselves. Speakers fully disappear in the best case. They are even matte to minimize video reflections during movies. But, I did give them a little color (cobalt blue), so not totally boringLooks are always subjective, but I bet this sounds amazing. On a side note, I’ve really enjoyed your audio journey. Your willingness to get off the beaten path is awesome, and I get to enjoy it at no cost![]()
How tall are the main speakers?Indeed these are mine! What you are seeing in the pic is the center channel (left) and one of the mains (right). Not to scale by the way, main is much larger.
It's about the journey, not the destinationcan't go through all the post, what was the end game setup![]()
Custom 11ch full range cardioid system (will support music and home theater) from Soundfieldcan't go through all the post, what was the end game setup![]()
Mains are 46.5", center is 41"How tall are the main speakers?
what a journey, congrats - and I guess you're happy with it?Custom 11ch full range cardioid system (will support music and home theater) from Soundfield
I don't think it's have to, people mention it because they are popular options when it comes to objective measurements. You can easily listen to them at showroom or even lend them to play at your home. Should you change your mind after one year or two, easy peasy.Reading some people's comments, you might get the impression that you literally have to buy Genelec, Neumann, or Revel because everyone knows the measurements/performance, and that's the only correct choice. Okay, I don't know, but in my opinion, the DIY option might actually be better—objective measurements—than all the off-the-shelf speakers available on the market. And there's something cool about owning unique speakers that no one else has.