This is a review and detailed measurements of the Denon AVR-X3900H 9.4 4K/8K Dolby Atmos AV Receiver. It was kindly drop shipped to me by a member and costs US $1,849.
It might be my imagination but the front panel looks a bit more modern. And the volume control no longer a stiff knob. It looks like you can drop down that front panel but it doesn't do so. Sadly, I could not figure out how to go through without the start-up sequency.
There was no "OK" button that I could find.
Speaking of start-up, after a few steps, it demanded that I setup a HEOS account or it would not continue! What the heck??? In the past this was advisory at the end but now it is in the middle of setup. Many people don't use AVRs for streaming so have no interest in such functionality.
I was pleased that there was a web interface which made interacting with the unit easy although I could not find access to Pure button so had to use the remote.
Everything worked well other than static that flickered when I selected CD analog input which naturally has no video. Why not have the option of some animation or slide show Denon?
Firmware was upgraded through HEOS app but seemingly, it decided to reboot later when I tried to soft power cycle the unit. It then took a long time to start.
Denon AVR-X3900H AVR DAC Performance Measurement
Nice to see continued support to turn off the amps so as to use the pre-out without the unit reducing performance. With the amp off, the results were quite respectable for the category:
You do have much more output voltage if you need it but comes at a penalty:
Gain matching will be a bit tricky seeing how there is interaction on where you set the volume control. Sweet spot is around 1.5 volt if that is also the optimal value for your power amp.
Above test digitally sweeps the input. Users would use the volume control so here is that:
Ignore the time scale -- that is how long it took me to turn the volume control 30 dB. Read the performance on the left on the blue line, and output voltage on the dashed red.
This is a few notches above my old favorite, AVR-X3600. Noise performance is really good, clearing 16 bit hurdle easily:
Multitone was again respectable:
As was IMD although we see that we are still far from desktop budget level class DAC:
Jitter showed fair bit of low level messiness:
Frequency response was fine:
I saw no filter selection in my quick look but what is there is again, fine:
I was disappointed that wideband noise+distortion is not beating our ancient $99 DAC reference:
Linearity is again, good for the class:
Denon AVR-X3900H Amplifier Measurements
I dialed the volume back a bit to get nominal 25 dB gain:
Switching to analog, we take a slight hit, as we should:
Going by eyeball average of the two, the amplifier is very good for the class:
To make comparisons easier, I stayed with analog input for the rest of the testing. I did have Pure Direct on as otherwise, there is a penalty for signal processing:
Looks like ADC sampling is 96 kHz which is quite a step up from typical 44.1/48 kHz given that gentle slope down in green. Low frequency rise is from the default crossover selection. I wish the level was calibrated so that the two graphs match. As is, there is half a dB mismatch.
Noise as you guessed it, is again very good for the category:
Multitone and 19+20 intermodulation measurements turned in good results as well:
Power levels are unchanged but overall, the 3900 is more quiet:
Seeing how I am only driving 2 channels, we have far more on tap during quick bursts:
And it doesn't give up much at 40 Hz:
Power sweeps at different frequencies shows typical, well behaved class AB performance:
You are noise limited at frequencies at or below 1 kHz. Then the loop gain bandwidth becomes insufficient and distortion starts to dominate fairly early (1 to 2 watts).
Conclusions
The AVR-X3900H seems like a mid-cycle turn up to use a car analogy. It seems to be more refined in every area without any of the regressions we have seen in past iterations. Really, other than some noise and inference in jitter, there is nothing that hurts the eye. Seeing how the brand has been my favorite in AVR class, this is all good news. Glad Denon has not put aside their Audio Precision analyzer!
This would be the mid priced AVR I would buy if I needed one.
I am going to recommend the Denon AVR-X3900H.
----------
As always, questions, comments, recommendations, etc. are welcome.
Any donations are much appreciated using: https://www.audiosciencereview.com/forum/index.php?threads/how-to-support-audio-science-review.8150/
It might be my imagination but the front panel looks a bit more modern. And the volume control no longer a stiff knob. It looks like you can drop down that front panel but it doesn't do so. Sadly, I could not figure out how to go through without the start-up sequency.
Speaking of start-up, after a few steps, it demanded that I setup a HEOS account or it would not continue! What the heck??? In the past this was advisory at the end but now it is in the middle of setup. Many people don't use AVRs for streaming so have no interest in such functionality.
I was pleased that there was a web interface which made interacting with the unit easy although I could not find access to Pure button so had to use the remote.
Everything worked well other than static that flickered when I selected CD analog input which naturally has no video. Why not have the option of some animation or slide show Denon?
Firmware was upgraded through HEOS app but seemingly, it decided to reboot later when I tried to soft power cycle the unit. It then took a long time to start.
Denon AVR-X3900H AVR DAC Performance Measurement
Nice to see continued support to turn off the amps so as to use the pre-out without the unit reducing performance. With the amp off, the results were quite respectable for the category:
You do have much more output voltage if you need it but comes at a penalty:
Gain matching will be a bit tricky seeing how there is interaction on where you set the volume control. Sweet spot is around 1.5 volt if that is also the optimal value for your power amp.
Above test digitally sweeps the input. Users would use the volume control so here is that:
Ignore the time scale -- that is how long it took me to turn the volume control 30 dB. Read the performance on the left on the blue line, and output voltage on the dashed red.
This is a few notches above my old favorite, AVR-X3600. Noise performance is really good, clearing 16 bit hurdle easily:
Multitone was again respectable:
As was IMD although we see that we are still far from desktop budget level class DAC:
Jitter showed fair bit of low level messiness:
Frequency response was fine:
I saw no filter selection in my quick look but what is there is again, fine:
I was disappointed that wideband noise+distortion is not beating our ancient $99 DAC reference:
Linearity is again, good for the class:
Denon AVR-X3900H Amplifier Measurements
I dialed the volume back a bit to get nominal 25 dB gain:
Switching to analog, we take a slight hit, as we should:
Going by eyeball average of the two, the amplifier is very good for the class:
To make comparisons easier, I stayed with analog input for the rest of the testing. I did have Pure Direct on as otherwise, there is a penalty for signal processing:
Looks like ADC sampling is 96 kHz which is quite a step up from typical 44.1/48 kHz given that gentle slope down in green. Low frequency rise is from the default crossover selection. I wish the level was calibrated so that the two graphs match. As is, there is half a dB mismatch.
Noise as you guessed it, is again very good for the category:
Multitone and 19+20 intermodulation measurements turned in good results as well:
Power levels are unchanged but overall, the 3900 is more quiet:
Seeing how I am only driving 2 channels, we have far more on tap during quick bursts:
And it doesn't give up much at 40 Hz:
Power sweeps at different frequencies shows typical, well behaved class AB performance:
You are noise limited at frequencies at or below 1 kHz. Then the loop gain bandwidth becomes insufficient and distortion starts to dominate fairly early (1 to 2 watts).
Conclusions
The AVR-X3900H seems like a mid-cycle turn up to use a car analogy. It seems to be more refined in every area without any of the regressions we have seen in past iterations. Really, other than some noise and inference in jitter, there is nothing that hurts the eye. Seeing how the brand has been my favorite in AVR class, this is all good news. Glad Denon has not put aside their Audio Precision analyzer!
I am going to recommend the Denon AVR-X3900H.
----------
As always, questions, comments, recommendations, etc. are welcome.
Any donations are much appreciated using: https://www.audiosciencereview.com/forum/index.php?threads/how-to-support-audio-science-review.8150/
Last edited: