• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required as is 20 years of participation in forums (not all true). Come here to have fun, be ready to be teased and not take online life too seriously. We now measure and review equipment for free! Click here for details.

Denon AVR-X3600H vs AVR-X4500H

Joined
Mar 13, 2019
Messages
69
Likes
16
#1
Hallo, I am wondering if anyone here has measurements or can confirms based on their experience if the 4500H has the same performance (HDMI outputs, DAC etc) as the 3600H or dose it have more in common with the 3500H. The receiver will be used in a 5.1(4 ohm) HT configuration without additional power amp.

Thank you in advance :)
 
Last edited:

peng

Major Contributor
Forum Donor
Joined
May 12, 2019
Messages
1,597
Likes
1,212
#2
Hallo, I am wondering if anyone here has measurements or can confirms based on their experience if the 4500H has the same performance (HDMI outputs, DAC etc) as the 3600H or dose it have more in common with the 3500H. The receiver will be used in a 5.1 HT configuration without additional power amp.

Thank you in advance :)
More in common with the X3600H, SR6014, and SR7013.
 

peng

Major Contributor
Forum Donor
Joined
May 12, 2019
Messages
1,597
Likes
1,212
#4
What about the noise and distortion, are there any reliable numbers to compare with the ASR review of 3600H?
I would say yes, the X3500H's preout SINADs were in the mid 90's at up to 1.2 V so I would think the X4500H's would be about the same as the X4700H's, if you use the amp assign feature to disconnect the front left and right build in power amps. If not, SINAD may start dropping at about 1.4 V, that may be more than enough depending on you spl requirements, speaker impedance, and the gain of your power amp.
 
Top Bottom