@hardisj (erinsaudiocorner) measured the SH50 from Danley Sound Labs with his Klippel NFS.
All credit for the measurements goes to @hardisj
UPDATE: I was contacted by a forum member if I am somehow in contact with Erin or acting on his behalf - given the tensions between Erin and Amir. This is not the case. It is simply an interesting speaker with a unique concept that intrigues me personally.
The manufacturer's specifications for the SH50 are as follows:
CTA-2034-A / Spinorama
Manufacturer FR measurement
Impedance measurement
Manufacturer Impedance measurement (note the different scaling when comparing)
Horizontal frequency response 0-90° and normalized contour plot (+-90° 180°)
Vertical frequency response +-40° and normalized contour plot (+-90° 180°)
Harmonic distortion at 86dB and 96dB
Dynamic range / compression test (for detailed information see erinsaudiocorner)
All credit for the measurements goes to @hardisj
UPDATE: I was contacted by a forum member if I am somehow in contact with Erin or acting on his behalf - given the tensions between Erin and Amir. This is not the case. It is simply an interesting speaker with a unique concept that intrigues me personally.
The manufacturer's specifications for the SH50 are as follows:
CTA-2034-A / Spinorama
Manufacturer FR measurement
Impedance measurement
Manufacturer Impedance measurement (note the different scaling when comparing)
Horizontal frequency response 0-90° and normalized contour plot (+-
Vertical frequency response +-40° and normalized contour plot (+-
Harmonic distortion at 86dB and 96dB
Dynamic range / compression test (for detailed information see erinsaudiocorner)
Last edited: