Hi,
Earlier I only read this forum, but I had a problem with this device Creative AE-9 and I contacted technical support, the answer that I received, let's say, surprised me very much. I post my correspondence with technical support:
__________________________________________
Roma:
Hi,
I have some problem with Sound Blaster AE-9.
Unfortunately I broke the HDMI cable, I can replace the Sound Blaster AE-9 HDMI with regular HDMI cable?
Thanks.
Best regards,
Roma.
___________________________________________
Stefani:
Dear Roma,
Thank you for contacting Creative Labs.
Please be informed that you might be referring to the ACM Link Port for the ACM.
Unfortunately, as this cable is directly attached into the Audio Control Model (and cannot be removed) and goes into the ACM link port, which is designed to be only connected with the Sound Blaster AE-9 Audio Control Module (ACM), it won’t be possible to replace this cable.
If the ACM link cable is broken as you have mentioned, you should replace the whole Audio control model (if available). You can provide us with your Country details, so we can check the availability and shipping options if you want us to.
If you require further assistance, please reply to this email and we will get back to you.
Regards,
Stefani
Creative Labs Pte Ltd
Worldwide Customer Response
Thank you.
________________________________________________
Roma:
Dear Stefani,
I have an attached image of the ACM inside and as we can see this cable can be disconnected.
I repeat my question, is the cable pinout the same as a regular HDMI cable?
I hope to hear an answer of my own, and not a proposal to change ACM.
Best regards,
Roma.
_________________________________________________
Stefani:
Dear Roma,
Thank you for your reply.
Please be informed that the ACM is not recommended and not intended for replacing the ACM link cable. It was designed as non-detachable, so replacing it with regular HDMI cable is not recommended and not tested. In addition the ACM link port in the sound card is a propriety port that is designed to be only connected with the Sound Blaster AE-9 Audio Control Module (ACM) attached cable.
We also do not have information on pins/components inside of our products.
Damage caused by normal wear and tear, or defects or damages resulting from opening and repairing the product are not covered by warranty.
https://support.creative.com/warranty
Damage caused by normal wear and tear, abnormal use or conditions, misuse, neglect, abuse, accident, improper handling or storage, defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software changes, or modification in any way by someone other than Creative or its authorized service centers, improper use of any electrical source, undue physical or electrical stress, operator error, non-compliance with instructions or other acts which are not the fault of Creative, including damage or loss during shipment or transit.
If you require further assistance, please reply to this email and we will get back to you.
Regards,
Stefani
Creative Labs Pte Ltd
Worldwide Customer Response
Thank you.
_______________________________________________
Roma:
Dear Stefani,
''We also do not have information on pins/components inside of our products.''
You want to say that you do not know what you produce!?!?
I did not expect such an answer...
Best Regards,
Roma.
______________________________________________
Question: Who is wrong in this situation? I'm a customer who wants an buy HDMI cable for $10 or if he doesn't have a standard pinout buy a "special" cable from the manufacturer or a manufacturer who tries to sell a whole electronics unit instead of a cable because of a broken cable?
Thanks.
Best regards,
Roma.
Earlier I only read this forum, but I had a problem with this device Creative AE-9 and I contacted technical support, the answer that I received, let's say, surprised me very much. I post my correspondence with technical support:
__________________________________________
Roma:
Hi,
I have some problem with Sound Blaster AE-9.
Unfortunately I broke the HDMI cable, I can replace the Sound Blaster AE-9 HDMI with regular HDMI cable?
Thanks.
Best regards,
Roma.
___________________________________________
Stefani:
Dear Roma,
Thank you for contacting Creative Labs.
Please be informed that you might be referring to the ACM Link Port for the ACM.
Unfortunately, as this cable is directly attached into the Audio Control Model (and cannot be removed) and goes into the ACM link port, which is designed to be only connected with the Sound Blaster AE-9 Audio Control Module (ACM), it won’t be possible to replace this cable.
If the ACM link cable is broken as you have mentioned, you should replace the whole Audio control model (if available). You can provide us with your Country details, so we can check the availability and shipping options if you want us to.
If you require further assistance, please reply to this email and we will get back to you.
Regards,
Stefani
Creative Labs Pte Ltd
Worldwide Customer Response
Thank you.
________________________________________________
Roma:
Dear Stefani,
I have an attached image of the ACM inside and as we can see this cable can be disconnected.
I repeat my question, is the cable pinout the same as a regular HDMI cable?
I hope to hear an answer of my own, and not a proposal to change ACM.
Best regards,
Roma.
_________________________________________________
Stefani:
Dear Roma,
Thank you for your reply.
Please be informed that the ACM is not recommended and not intended for replacing the ACM link cable. It was designed as non-detachable, so replacing it with regular HDMI cable is not recommended and not tested. In addition the ACM link port in the sound card is a propriety port that is designed to be only connected with the Sound Blaster AE-9 Audio Control Module (ACM) attached cable.
We also do not have information on pins/components inside of our products.
Damage caused by normal wear and tear, or defects or damages resulting from opening and repairing the product are not covered by warranty.
https://support.creative.com/warranty
Damage caused by normal wear and tear, abnormal use or conditions, misuse, neglect, abuse, accident, improper handling or storage, defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software changes, or modification in any way by someone other than Creative or its authorized service centers, improper use of any electrical source, undue physical or electrical stress, operator error, non-compliance with instructions or other acts which are not the fault of Creative, including damage or loss during shipment or transit.
If you require further assistance, please reply to this email and we will get back to you.
Regards,
Stefani
Creative Labs Pte Ltd
Worldwide Customer Response
Thank you.
_______________________________________________
Roma:
Dear Stefani,
''We also do not have information on pins/components inside of our products.''
You want to say that you do not know what you produce!?!?
I did not expect such an answer...
Best Regards,
Roma.
______________________________________________
Question: Who is wrong in this situation? I'm a customer who wants an buy HDMI cable for $10 or if he doesn't have a standard pinout buy a "special" cable from the manufacturer or a manufacturer who tries to sell a whole electronics unit instead of a cable because of a broken cable?
Thanks.
Best regards,
Roma.