I recently started the the conversation of this Klipsch from passive to active, mainly just for the learning experience. Thus far I've removed the passive crossover and connecting the binding posts directly to the drivers. I am now designing the active crossover, tweeter first.
Here are the measurement of the raw tweeter (1/24 smoothing).
Here is the target and predicated with the tweeter eq/crossover.
Anyone know how clean up the alternating wave between? 3k and7k? I've not had any luck.
I've exported these filters so they can be loaded into Eq APO, here is what they look like.
Equaliser: Generic
rp160m tweeter Nov 22
Filter 1: ON PK Fc 517.0 Hz Gain -26.40 dB Q 8.287
Filter 2: ON PK Fc 534.0 Hz Gain -18.70 dB Q 8.243
Filter 3: ON PK Fc 574.0 Hz Gain -11.80 dB Q 7.207
Filter 4: ON PK Fc 601.0 Hz Gain -19.00 dB Q 8.033
Filter 5: ON PK Fc 666.0 Hz Gain -16.90 dB Q 7.804
Filter 6: ON PK Fc 687.0 Hz Gain -11.60 dB Q 7.371
Filter 7: ON PK Fc 720.0 Hz Gain -11.40 dB Q 7.478
Filter 8: ON PK Fc 774.0 Hz Gain -15.40 dB Q 7.573
Filter 9: ON PK Fc 858.0 Hz Gain -13.40 dB Q 7.393
Filter 10: ON PK Fc 967.0 Hz Gain -13.00 dB Q 7.178
Filter 11: ON PK Fc 1029 Hz Gain -4.40 dB Q 6.985
Filter 12: ON PK Fc 1098 Hz Gain -8.70 dB Q 6.953
Filter 13: ON PK Fc 1330 Hz Gain -5.30 dB Q 6.612
Filter 14: ON PK Fc 2072 Hz Gain -1.70 dB Q 5.756
Filter 15: ON PK Fc 2445 Hz Gain -1.80 dB Q 5.166
Filter 16: ON PK Fc 3467 Hz Gain -1.60 dB Q 2.743
Filter 17: ON PK Fc 12812 Hz Gain -1.70 dB Q 2.828
Filter 18: ON PK Fc 17470 Hz Gain -1.80 dB Q 3.000
Filter 19: ON None
Filter 20: ON None
Filter 21: ON None
Filter 25: ON None
My important question here is will Eq APO not allow any signal below 517 hz to make it to the tweeter? It's important I protect the tweeter of course.
Thanks,
Paul
Here are the measurement of the raw tweeter (1/24 smoothing).
Here is the target and predicated with the tweeter eq/crossover.
Anyone know how clean up the alternating wave between? 3k and7k? I've not had any luck.
I've exported these filters so they can be loaded into Eq APO, here is what they look like.
Equaliser: Generic
rp160m tweeter Nov 22
Filter 1: ON PK Fc 517.0 Hz Gain -26.40 dB Q 8.287
Filter 2: ON PK Fc 534.0 Hz Gain -18.70 dB Q 8.243
Filter 3: ON PK Fc 574.0 Hz Gain -11.80 dB Q 7.207
Filter 4: ON PK Fc 601.0 Hz Gain -19.00 dB Q 8.033
Filter 5: ON PK Fc 666.0 Hz Gain -16.90 dB Q 7.804
Filter 6: ON PK Fc 687.0 Hz Gain -11.60 dB Q 7.371
Filter 7: ON PK Fc 720.0 Hz Gain -11.40 dB Q 7.478
Filter 8: ON PK Fc 774.0 Hz Gain -15.40 dB Q 7.573
Filter 9: ON PK Fc 858.0 Hz Gain -13.40 dB Q 7.393
Filter 10: ON PK Fc 967.0 Hz Gain -13.00 dB Q 7.178
Filter 11: ON PK Fc 1029 Hz Gain -4.40 dB Q 6.985
Filter 12: ON PK Fc 1098 Hz Gain -8.70 dB Q 6.953
Filter 13: ON PK Fc 1330 Hz Gain -5.30 dB Q 6.612
Filter 14: ON PK Fc 2072 Hz Gain -1.70 dB Q 5.756
Filter 15: ON PK Fc 2445 Hz Gain -1.80 dB Q 5.166
Filter 16: ON PK Fc 3467 Hz Gain -1.60 dB Q 2.743
Filter 17: ON PK Fc 12812 Hz Gain -1.70 dB Q 2.828
Filter 18: ON PK Fc 17470 Hz Gain -1.80 dB Q 3.000
Filter 19: ON None
Filter 20: ON None
Filter 21: ON None
Filter 25: ON None
My important question here is will Eq APO not allow any signal below 517 hz to make it to the tweeter? It's important I protect the tweeter of course.
Thanks,
Paul