Hey, sorry for a late reply
Measure your speaker with filters on and off. Use the A/B trace arithmetic function in REW, and thereafter flatten the resulting curve via the EQ module. Use the "generic" EQ setting. If 20 PEQs is not enough, just apply a second layer of EQ on top it.
*actually, this method assumes you have a microphone. Another method is to digitally measure the output signal of the filtered response vs unfiltered...
Well that sounds kind of complicated to me as I'm only into basics of audio tech (which I hope will change after participating into this forum). Not experienced in taking measurements and interpreting them.
@CaptainBeyond possible without Webplotdigitizer using Audacity loopback recording, Room EQ Wizard, and an AutoEQ GUI like
this (the Equalizer Tab).
I can send you a short tutorial if you'd like. Can you send me your GEQ preset?
oh yeah, a step-by-step tutorial from A to B would be very, very helpful in this case, as you can interpret from what I wrote above, thank you very much!
That's my Equalizer APO settings from a file:
Device: Digital Audio (S/PDIF) High Definition Audio Device
Preamp: -6 dB
GraphicEQ: 20 -27.01; 25 -20.87; 31.5 -14.05; 40 -7.41; 50 -1.65; 63 2.94; 80 6.35; 100 7.2; 125 4.27; 160 -0.66; 200 -5.94; 250 -9.75; 315 -12.49; 400 -14; 500 -15.7; 630 -16.77; 800 -17.09; 1000 -17.46; 1250 -17.46; 1600 -17.46; 2000 -17.46; 2500 -17.09; 3150 -15.7; 4000 -13.74; 5000 -10.53; 6300 -7.41; 8000 -6.22; 10000 -7.41; 12500 -10.53; 16000 -17.46; 20000 -26.93
Filter: ON HSC Fc 3500 Hz Gain -9.7 dB Q 0.3333
# Filter: ON LSC Fc 125 Hz Gain -1.8 dB Q 0.4082
And this is how it looks graphically:
Set it up by ear.
I'm just using these two PEQ filters to adjust highs (basically just sibilance existing on some records) and bass boost when it's needed.
This sounds really good to my taste with music I enjoy to listen to, even just out from youtube, but would like to try to listen to some lossless via WASAPI mode and watch movies in Jriver with the same settings.
Ideally, to simplify things out maybe there is some Jriver plugin with similar UI that the Equalizer APO has? I find these PEQ knobs with gain and Q very, very convenient to adjust the sound to my preferences.
Best wishes