Converter Tests RND MBC, Pure2, RME M-1620 Pro D, Clarett+ Octopre

[Gunnar78]

Hi there,
I am doing some testing with the following devices:
Clarett= Octopre
Rupert Neve Design ADC
RME M 1620 Pro
Antelope Pure2

Everything has been done with Right Mark Audio Analyzer using various RME cards for connecting the devices.

As everything is cabled for other Recording purposes and I do not have the energy to do recabling (sorry), I do not have loops of all devices. Plus there is the Dangerous Liason between the devices most of the time, which may or may not influence the results (I guess there is a 0,1 db calibration problem on one side).

So this is NOT a PURE test using direct cable connections, rather a test of a studio environment.

I will use several postings after this initial posts so that I do not put wrong results in.

The pictures show the following categories of the software>
Cross, dynamics, fr, imd, imdswept, noise, thd.

I will post further tests, but little time to do so.

 

[Gunnar78]

Antelope Pure 2 Loop (Dangerous Music Liaison in between)

 

[Gunnar78]

Pure2 to RME M 1620 Pro (Dangerous Music Liaison in between)

 

[Gunnar78]

Clarett+ Octopre Loop (another device in hard bypass in between): I had to manually adjust L and R Channel on inputs

 

[Gunnar78]

Clarett+ Octopre to RME ML 1620 (Liaison in

between)

 

[Gunnar78]

Clarett+ Octopre to Rupert Neve Master Buss converter (limiter off, transformer off; Liaison inbetween)