• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Cadentia 3 Product Development thread / Audio First Designs

Since Harry won't reply to DM or email does anyone know if there are plans for different diy kits? Like for building your own cabinet or doing active xover.
 
Since Harry won't reply to DM or email does anyone know if there are plans for different diy kits? Like for building your own cabinet or doing active xover.
He mentioned wanting to move out of DIY. Though he does accommodate some stuff not on the website
 
Is it just me or do the speaker terminals used not accommodate spades? Seems like the binding post is too big.
 
  • 2-way system
  • Sensitivity around 89 -90db
  • 1-inch exit compression driver with horn+ 7.5-inch TPCD woofer, capable of high output
  • Side- or down-firing bass reflex port; can be plugged to make it sealed if wanted (accessories included).
  • Size HxWxD: 400mm x 260mm x 150mm
  • VESA 100 x 100 mounting
  • Comes with grille
Just didn't really see many products similar to this on the market.
Yeah darn few. Arendal but sensitivity much lower. The Purifi stuff also low sensitivity. All a consequence of trying to have bass versus "Hofmann's Iron Law" which is a bit silly if you are presuming the product will be used with subwoofers.
- My interest is something much MORE sensitive especially if there is a horn. Like 93...96...99 dB! OK even with a sub you probably want to go down to 100 Hz so 93+ dB is more realistic.
- Maybe twin woofers, or maybe just one in the cabinet volume available, to hit that 100ish Hz.
- And for such application with a sub forget the complicating port sez me. Probably hard to fit one big enough to really work at higher SPL anyway.
- VESA mounting is very nice, that's how I have some kind-of-temporary Arendal mounted at the moment.
- YES a grille! Metal against cats/dogs? Or fabric if too expensive but a lot of folks don't want to see woofers and tweeters I suppose, to me they can be beautiful but all us loudspeaker engineers are weirdos ha ha.

I have not seen any definitive study or been able to do my own, but I suspect low distortion at high SPL especially in the mids is what separates the beefy from the weak. At Upscale Audio as I've posted elsewhere I spent some hours cranking Monitor Audio Silver 300s. I was absolutely gobsmacked how loud they could play and still sound clean, even with Iron Maiden and No Sleep 'Til Hammersmith
 
Hi guys, a customer (who's an ASR member previously) shared his feedback on the Cadentia 3 kit with me, and he kindly let me post it here:

" My Cadentia 3 kit is now built and up and running since a few days. Since my woodworking skills are low I used oil based stain then two layers of oil based satin polyurethane on the cabinet. They came out fine I'd say.

My Cadentia 3's are fully Textreme'd. Since Textreme is a Swedish developed material I needed to support them (small Swedish firm). Have both a cat and small grandchildren visiting so I implemented Cat & Child protection on the woofers (see picture).

Started off my listening session of the speakers all by myself at first. Played through Roon/Tidal & RME ADI2 DAC as well vinyl on my Sony PS-8750 turntable.

My musical taste is very diversified, played Classical music (Mahler, Tchaikovsky, Mozart aso), Pop (Rosalia, Doja cat, Laufey aso), Jazz (Esbjörn Svensson Trio, Raye, Ayanna Witter-Johnson, Cassandra Wilson ...) and many more.

Having had many, many speakers over the years eg KEF floorstanders, Evolution Acoustics, Elac, Gauder Akustik, Adam, Wharfedale, the Cadentia 3 are by far the best speakers I've had.

Invited family & friends over for a musical evening with wine, dine and music. All musical connoisseurs ranging from youngsters to some distinguished members of Swedish AES. We all agreed that the speakers can't be faulted. Passed a lovely musical evening with flying colors!

Thanks Harry for an outstanding speaker!

Written by former ASR member LarsS. "

IMG_0754.jpeg


IMG_0755.jpeg


Beautiful work!
 
Hi guys, a customer (who's an ASR member previously) shared his feedback on the Cadentia 3 kit with me, and he kindly let me post it here:

" My Cadentia 3 kit is now built and up and running since a few days. Since my woodworking skills are low I used oil based stain then two layers of oil based satin polyurethane on the cabinet. They came out fine I'd say.

My Cadentia 3's are fully Textreme'd. Since Textreme is a Swedish developed material I needed to support them (small Swedish firm). Have both a cat and small grandchildren visiting so I implemented Cat & Child protection on the woofers (see picture).

Started off my listening session of the speakers all by myself at first. Played through Roon/Tidal & RME ADI2 DAC as well vinyl on my Sony PS-8750 turntable.

My musical taste is very diversified, played Classical music (Mahler, Tchaikovsky, Mozart aso), Pop (Rosalia, Doja cat, Laufey aso), Jazz (Esbjörn Svensson Trio, Raye, Ayanna Witter-Johnson, Cassandra Wilson ...) and many more.

Having had many, many speakers over the years eg KEF floorstanders, Evolution Acoustics, Elac, Gauder Akustik, Adam, Wharfedale, the Cadentia 3 are by far the best speakers I've had.

Invited family & friends over for a musical evening with wine, dine and music. All musical connoisseurs ranging from youngsters to some distinguished members of Swedish AES. We all agreed that the speakers can't be faulted. Passed a lovely musical evening with flying colors!

Thanks Harry for an outstanding speaker!

Written by former ASR member LarsS. "

View attachment 557735

View attachment 557736

Beautiful work!
oh great use of the Wharfedale stands. Looks awesome
 
A speaker compnay of this caliber that offers a DIY option is a unicorn in this industry.
My advice would be if you're on the fence & really want that option do it NOW.

From what I glean on Harry's posts, he's set up a SOTA facility & listening\evaluaton space.
This man is no where near being done with his dream & ambition.
IMO, the DIY option doesn't pencil out in a long term P&L calc.

There's a lot more to come from Audio First
 
Hey guys! Finally, I could share one of the most interesting consultancy projects I’ve worked on this year: a collaboration with Audioscenic, a software company based in Southampton, to design this professional Soundbar capable of simulating 7.1.4 surround sound.

1789851737466.png


I was responsible for the industrial and acoustic design, while Audioscenic handled the electronics and software algorithms. The product is primarily aimed at professional applications. Not every studio has the space or budget for a full 7.1.4 monitoring system, especially as more people are mixing in small home studios. This Soundbar can provide a very complete surround monitoring experience using little more than the space around a mixing desk. I built a few demo units for them back in July, and the Soundbar was finally demonstrated at GearCon in London yesterday and today.

I actually have quite a bit of history with Audioscenic. Ten years ago, while I was doing my Master’s degree, I attended an AES Student event in Southampton where I experienced a very unusual surround-sound demonstration. At the time, it was just a university PhD research project, but I remember thinking how interesting it would be if the technology could ever become a commercial product.

The researchers behind that project eventually founded Audioscenic. This year, they were looking for someone to help design and build a Soundbar, and several people in the industry recommended me. So, ten years after hearing that original demo, Audio First Designs ended up becoming their partner.

1789851778136.png


The technology is fundamentally different from conventional surround-sound Soundbars. Rather than relying mainly on ceiling/side-wall reflections, Audioscenic uses cameras and IR sensors for real-time head tracking, arrays of drivers for beamforming which "shot" the sound directly to your ears, and extremely intensive crosstalk cancellation. This allows the system to precisely control what each ear hears while greatly reducing the influence of the room, before sending you the binaural audio content.

The same technology can also create highly separated audio zones within a relatively small space — for example, allowing the driver and passengers in a car to listen to completely different audio content.

I have to say, when it comes to simulating a 7.1.4 system from a single speaker, this soundbar is the most convincing implementation I’ve heard so far. The experience rivals a proper physical multichannel system to an extent! More details about this soundbar and the potential release plan will be announced by Audioscenic soon.
 
Hey guys! Finally, I could share one of the most interesting consultancy projects I’ve worked on this year: a collaboration with Audioscenic, a software company based in Southampton, to design this professional Soundbar capable of simulating 7.1.4 surround sound.

View attachment 559858

I was responsible for the industrial and acoustic design, while Audioscenic handled the electronics and software algorithms. The product is primarily aimed at professional applications. Not every studio has the space or budget for a full 7.1.4 monitoring system, especially as more people are mixing in small home studios. This Soundbar can provide a very complete surround monitoring experience using little more than the space around a mixing desk. I built a few demo units for them back in July, and the Soundbar was finally demonstrated at GearCon in London yesterday and today.

I actually have quite a bit of history with Audioscenic. Ten years ago, while I was doing my Master’s degree, I attended an AES Student event in Southampton where I experienced a very unusual surround-sound demonstration. At the time, it was just a university PhD research project, but I remember thinking how interesting it would be if the technology could ever become a commercial product.

The researchers behind that project eventually founded Audioscenic. This year, they were looking for someone to help design and build a Soundbar, and several people in the industry recommended me. So, ten years after hearing that original demo, Audio First Designs ended up becoming their partner.

View attachment 559860

The technology is fundamentally different from conventional surround-sound Soundbars. Rather than relying mainly on ceiling/side-wall reflections, Audioscenic uses cameras and IR sensors for real-time head tracking, arrays of drivers for beamforming which "shot" the sound directly to your ears, and extremely intensive crosstalk cancellation. This allows the system to precisely control what each ear hears while greatly reducing the influence of the room, before sending you the binaural audio content.

The same technology can also create highly separated audio zones within a relatively small space — for example, allowing the driver and passengers in a car to listen to completely different audio content.

I have to say, when it comes to simulating a 7.1.4 system from a single speaker, this soundbar is the most convincing implementation I’ve heard so far. The experience rivals a proper physical multichannel system to an extent! More details about this soundbar and the potential release plan will be announced by Audioscenic soon.
that is such interesting news. Wow. Will keep an eye out
 
Hey guys! Finally, I could share one of the most interesting consultancy projects I’ve worked on this year: a collaboration with Audioscenic, a software company based in Southampton, to design this professional Soundbar capable of simulating 7.1.4 surround sound.

View attachment 559858

I was responsible for the industrial and acoustic design, while Audioscenic handled the electronics and software algorithms. The product is primarily aimed at professional applications. Not every studio has the space or budget for a full 7.1.4 monitoring system, especially as more people are mixing in small home studios. This Soundbar can provide a very complete surround monitoring experience using little more than the space around a mixing desk. I built a few demo units for them back in July, and the Soundbar was finally demonstrated at GearCon in London yesterday and today.

I actually have quite a bit of history with Audioscenic. Ten years ago, while I was doing my Master’s degree, I attended an AES Student event in Southampton where I experienced a very unusual surround-sound demonstration. At the time, it was just a university PhD research project, but I remember thinking how interesting it would be if the technology could ever become a commercial product.

The researchers behind that project eventually founded Audioscenic. This year, they were looking for someone to help design and build a Soundbar, and several people in the industry recommended me. So, ten years after hearing that original demo, Audio First Designs ended up becoming their partner.

View attachment 559860

The technology is fundamentally different from conventional surround-sound Soundbars. Rather than relying mainly on ceiling/side-wall reflections, Audioscenic uses cameras and IR sensors for real-time head tracking, arrays of drivers for beamforming which "shot" the sound directly to your ears, and extremely intensive crosstalk cancellation. This allows the system to precisely control what each ear hears while greatly reducing the influence of the room, before sending you the binaural audio content.

The same technology can also create highly separated audio zones within a relatively small space — for example, allowing the driver and passengers in a car to listen to completely different audio content.

I have to say, when it comes to simulating a 7.1.4 system from a single speaker, this soundbar is the most convincing implementation I’ve heard so far. The experience rivals a proper physical multichannel system to an extent! More details about this soundbar and the potential release plan will be announced by Audioscenic soon.
Very interesting, I'm curious about the tradeoffs between this and an ultrasonic parametric array
 
Hi guys, hope you are all doing well.

I will be away for a long-needed holiday in Asia for three weeks starting today. Before I go, I have a few updates to share here:

1. Cadentia 3 and Fidelia kit all sold out for this year!

So thanks for all your support. I will be focusing on new product R&D and consultancy work for the rest of the year, so I won't restock them for a while. Please subscribe to my newsletter to get updates regarding the next batches.

2. Cadentia 3 B-stock front baffles available.

I have a few Cadentia 3 front baffles with small blemishes on the surface, damaged paint, etc. I am offering them at a discounted price together with other parts, but without the birch plywood panels (out of stock). So you will have to build your own cabinet from scratch. Please contact me if you are interested.

3. Cadentia 2 development

Due to the office move and all other work, the development of the Cadentia 2 two-way speaker was a bit slower than expected, but it is now done. Now I am waiting for production samples and hopefully releasing it (Kit version first, limited quantity) at the end of this year.

1791886972529.jpeg


4. CNC machine in the new office!

To speed up prototyping and trying out ideas, I decided to get a CNC machine for the workshop so I don't have to rely on my supplier all the time. This also lets me produce replacement parts faster for customers if anything gets damaged during shipment. It's an Altmill Mk2 4x4 from Canada, which a lot of people recommended. I just managed to put this together before my trip (well, still need to sort out the base/waste board and dust collection), and I am looking forward to starting to use it when I return!

1791885652296.png
 
Hi guys, hope you are all doing well.

I will be away for a long-needed holiday in Asia for three weeks starting today. Before I go, I have a few updates to share here:

1. Cadentia 3 and Fidelia kit all sold out for this year!

So thanks for all your support. I will be focusing on new product R&D and consultancy work for the rest of the year, so I won't restock them for a while. Please subscribe to my newsletter to get updates regarding the next batches.

2. Cadentia 3 B-stock front baffles available.

I have a few Cadentia 3 front baffles with small blemishes on the surface, damaged paint, etc. I am offering them at a discounted price together with other parts, but without the birch plywood panels (out of stock). So you will have to build your own cabinet from scratch. Please contact me if you are interested.

3. Cadentia 2 development

Due to the office move and all other work, the development of the Cadentia 2 two-way speaker was a bit slower than expected, but it is now done. Now I am waiting for production samples and hopefully releasing it (Kit version first, limited quantity) at the end of this year.

View attachment 564126

4. CNC machine in the new office!

To speed up prototyping and trying out ideas, I decided to get a CNC machine for the workshop so I don't have to rely on my supplier all the time. This also lets me produce replacement parts faster for customers if anything gets damaged during shipment. It's an Altmill Mk2 4x4 from Canada, which a lot of people recommended. I just managed to put this together before my trip (well, still need to sort out the base/waste board and dust collection), and I am looking forward to starting to use it when I return!

View attachment 564123
wishing you all the best of rest and fun. Excited to see what you cook up with the CNC next year during new R&D
 
Here's what I glean from Harry's posts:
He plows his profits back into meaningful R&D.
Optimum Klippel evaluation, killer listening room, in-house CNC fabrication.
This is a person exploiting his experience to create a focused design\build process that emulates far larger\well-capitalized corporations.

I'm only worried he'll develop a Cadentia 4 floorstander & I won't be able to resist.

Harry, take an extra week. That's a long flight :cool:
 
Back
Top Bottom