Budget tall mid-bass to sub speaker, to act as stand for LS50s

[john61ct]

Way over my pay grade, but thanks for expanding my awareness of how much I don't know ;-)

 

[jgd]

 

[jgd]

Dayton Audio MKSX4 Four 4" Driver Low Profile Passive Subwoofer (above)

 

[john61ct]

Dayton Audio MKSX4 Four 4" Driver Low Profile Passive Subwoofer (above)

VERY interesting, posted by @Wolf !

Apparently uses Tang Band W3-2088SOF
F3 ~ 50-60Hz

Test Bench: Tang Band W3-2088SOF Micro Home Audio Subwoofer

This a Test Bench of Tang Band's W3-2088SOF, a high XMAX 3.5" home audio RBM Micro subwoofer. The W3-2088SOF is built on an injection-molded eight-spoke frame that supports an unusual rectangular housing. The really unusual feature is that the W3-2088SOF does not use a spider. Instead it gets...

audioxpress.com

says the LPF could be up well over 500Hz, so 200-300Hz should be no problem.

efficiency / SPL not so great but then there'd be two, or maybe more, or just reinforcement do testing with overlapping the LS50

i assume no crossover circuits in there at all?

If only it was wider, LS50 footprint is ~ 8x11" (20.3 x 28cm)

and a bit taller, 16" is pretty low.

I suppose I could waste some money on stands that these would sit under, or vice/versa.