Audiolab 6000A Firmware update

[tibik]

Thanks onx!
It works like a dream.

 

[Jetson61]

Hello everyone.
I don’t have the opportunity to visit the forum often, but I frequently check my email. So if you are sure that your menu reads VER-032 or VER-033 or other VER-0XX and your processor is GD, write to me by email and I will send you the firmware. troyanz(a)ukr.net

Hi onx,

I don't know how to view member e-mail. So I also have same problem with my audiolab 6000a, updated to st33 but chip GD. Could you send me the good firmware ?
Sorry for my english, I'm french canadien. Happy Holidays.

 

[audio_tony]

I don't know how to view member e-mail.

Look at the top right of your screen (if on a computer, I don't know what it looks like on a mobile device).

You will see a bell for notifications and an envelope for email. That's where you view and send email messages.

Your name will appear to the left (I have blurred my name out).

To send email, click on the user's name and click "start conversation" (if you're not an English user this might be in your own language).

 

[Jetson61]

Thanks onx!
It works like a charme now !
Firmware now indicate GVR-034, normal?

 

[Exeng]

Hello onx,
I have an Audiolab 6000A with a GD32F105 processor (I checked inside) which, like so many others, was shipped with VER-032 firmware.
Would you be so kind as to send me the correct firmware. Your advice is so useful.

Thank you,
Exeng

 

[Lovemusic309]

Hello Onx,
can you send me the update for audiolap 6000a , that works, thank you.

 

[Exeng]

Hello onx,
The firmware solved my 6000A "not waking from standby" & "starting in OPT1" problems.

Many thanks.

 

[arsaguard]

Can someone send me this GD32F105 firmware, please?
Edit: Fixed, thanks to Onx.

 

[PetOv]

Hello,
can someone (Onx) please send me the firmware update for Audiolab 6000a. I have the "no save settings" issue discussed here.

 

[ewdan]

Hello onx,
I have an Audiolab 6000A with a GD32F105 processor and updated to VER-033 firmware.
Would you be so kind as to send me the correct firmware.

Thank you

 

[PetOv]

Hello,
can someone (Onx) please send me the firmware update for Audiolab 6000a. I have the "no save settings" issue discussed here.

Thanks arsaguard, it worked.

 

[ekgpdx]

Hello! I am having the same resetting settings issue with my Audiolab 6000a. Onx or someone would you kindly send the correct firmware?
Thank you very much!

 

[Arhippa]

New member here (though I’ve been visiting the forum quite frequently).

Just bought 6000A myself and of course I have the same problem with the unit not remembering the settings (V032). So firmware update needed here too, if Onx would be so kind

 

[Arhippa]

Thanks to arsaguard, got the update and the amp works now flawlessly. For some reason, 6000A didn’t show PRO ING and FINISH messages while installing, just shut the amp down as soon as it detected USB drive. Seemed to work though, so I’m happy.

 

[Arhippa]

BTW, scrolling the menu of 6000A revealed a solution to audio dropouts with certain TVs (for instance LGs like mine). There is jitter reduction settings for second opt and coax inputs that are not mentioned in the manual, PLL DG2 and PLL OP2. Default setting is NORMAL, switching that to WIDE solves the problem.

 

[Krisz76]

Igen. De a ház réseiből is le tudod fotózni. Csak használj egy lámpát és a telefonod, hogy lefényképezd. Vagy kinyithatod a házat, és megnézheted a processzort 8 órán át az előlapról. Ha GD32F105-öt találsz, akkor GVR firmware-re van szükséged, ha pedig ST32F105-öt, akkor ST firmware-re. Van megfelelő firmware-em a GD32F105 processzor flasheléséhez 6000a-n, nem Play verzión. Ha megtalálod a GD32F105-öt, szólj, küldhetek egy linket a letöltéshez.

Megkaphatnám a letöltési linket is? Pontosan ugyanez a problémám. A processzor típusa GD32F105.

 

[Krisz76]

Küldtem egy linket, amit kipróbálhatsz. És ha nem szeretnél sok spamet kapni, távolítsd el a leveleidet a fórumról.
Remélem, segít.

 

[Krisz76]

Could I also get the download link, please? I have exactly the same problem. Processor type is GD32F105.

 

[New_User]

Hello all.

I experience these two issues with my 6000A:

- sometimes have to switch off completely, resume from standby is not possible
- hardware input selector is without function

Can someone send me this GD32F105 firmware, please?

 

[New_User]

Thanks to @arsaguard for sending me the firmware.

With this firmware the 6000A does remember source and volume previously set.
But the source selector knob is still without function. Source selection via remote is possible.

Does anyone have the same issue? Any idea how to fix it?