• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Audio furniture: AV stand (TV stand)

sprellemannen

Active Member
Forum Donor
Joined
Jul 21, 2018
Messages
259
Likes
554
Can you help me with suggestions for a great AV stand which satisfies (most of) the criterions a) to g) below?

I am looking for a gorgeous and wide AV stand. It will contain a huge TV on top and my components in a shelf.
It should be:
a) In white finish (preferably high-gloss white). But a part of the stand may be in another colour (for instance its top plate or the feet).
b) At least 180cm wide (prefereably from 180cm to 300cm).
c) At least 45cm deep (preferably from 45cm to 55cm, but a little big deeper than 55 cm is also OK).
d) Approximately 1 meter or more should be "open" (in the same shelf) to contain hi-fi my components.
e) The height from bottom to top for the shelf with components does not need to be large, since my highest component is 24cm.
f) Look gorgeous. A modern style is preferred.
g) Can be a little expensive, but not very expensive (it should preferably not cost more than USD 4000).
 
Last edited:

amirm

Founder/Admin
Staff Member
CFO (Chief Fun Officer)
Joined
Feb 13, 2016
Messages
44,596
Likes
239,655
Location
Seattle Area
For $4000 you may want to find a local custom furniture maker to build you exactly what you want. Some of the kitchen cabinet makers may also be able to build it for you.

For commercial stuff, I usually recommend Sanus but just looked and they have hugely reduced their models. I know they were hit by China tariffs but didn't realize they had cut back on what they carry.
 

Wayne A. Pflughaupt

Active Member
Joined
Mar 14, 2016
Messages
286
Likes
258
Location
Corpus Christi, TX
That white finish is probably going to present a challenge. You might find something appropriate and get a custom furniture builder, or maybe an automotive paint and body shop, to paint it.

Regards,
Wayne A. Pflughaupt
 

Wombat

Master Contributor
Joined
Nov 5, 2017
Messages
6,722
Likes
6,463
Location
Australia
Stainless Steel Furniture Legs, Ebay:https://www.ebay.com.au/sch/i.html?_from=R40&_nkw=stainless+steel+furniture+legs&_sacat=0&LH_TitleDesc=0&Type=Sofa%20Legs&_dcat=179690&rt=nc&_pgn=2

Kitchen bench-tops are readily available to length and can be thicker than the usual 18mm product. Choice of front edge profile, too.

(Some cheaper(cf your budget) options: https://www.ikea.com/au/en/catalog/categories/departments/living_room/10475/)

It wouldn't be too costly to get a cabinet guy to bring it all together.
 
D

Deleted member 65

Guest
Italian Music Tools produces some nice racks http://www.musictools.eu/ENG/prodotti/prodotti.html

1545255219659.png
 
Top Bottom