It's not that simple, impendance has a huge influence, and this speaker does not have a flat 8 ohm impendance. Impendance swings between 6 and 20 Ohm so you You will need a bit more to drive them to full potential. And you need headroom to not distort the amp. I would say that a +250W amp is what is needed to drive this speaker to full potential with all the headroom that is needed.85db speaker hits 100db with 32w so you really don't need much power at all to make a speaker like that loud in most spaces.
It's not that simple, impendance has a huge influence, and this amps does not have a flat 8 ohm impendance. Impendance swings between 6 and 20 Ohm so you You will need a bit more to drive them to full potential. And you need headroom to not distort the amp. I would say that a +250W amp is what is needed to drive this speaker to full potential with all the headroom that is needed.
100dB at 1m. These are not nearfields, so expect 2-3m listening distance. The math in free field is pretty simple (double distance, SPL drops off by 6dB), but real-world isn't. Either way, 100wpc is probably the bare minimum I'd want to use in a typical situation with SCM50 passives.85db speaker hits 100db with 32w so you really don't need much power at all to make a speaker like that loud in most spaces.
Trust me, you will forget about 100w amp very soon if you had scm50 at your disposal.100dB at 1m. These are not nearfields, so expect 2-3m listening distance. The math in free field is pretty simple (double distance, SPL drops off by 6dB), but real-world isn't. Either way, 100wpc is probably the bare minimum I'd want to use in a typical situation with SCM50 passives.
Actually 103dB since unlikely to be listening to just one speaker. Then another couple of dB for room gain. That difference of 3dB between the 100 watt amp and the 200 watt amp starts to become inconsequential. Not impossible there would be a situation where it was make or break, but....100dB at 1m. These are not nearfields, so expect 2-3m listening distance. The math in free field is pretty simple (double distance, SPL drops off by 6dB), but real-world isn't. Either way, 100wpc is probably the bare minimum I'd want to use in a typical situation with SCM50 passives.
So that's 250w per side, like i said. And that is the small one, the big one probally can use more watt.I have the active 20 Pros. ATC fits them with 50w for each tweeter and 200w for each woofer, so 500w in total for the pair. I've never seen the red clip lights come on in mine no matter how hard I drive them, it would be deafening I'm sure!
So you are saying that a 40 watt a channel amp with no head room would be just fine?85db speaker hits 100db with 32w so you really don't need much power at all to make a speaker like that loud in most spaces.
So you are saying that a 40 watt a channel amp with no head room would be just fine?
I don't see how one could not draw that conclusion from you stating that 32 watts hits a 100 DB. To me (and everyone that I asked in person [6 people)], myself felt that you are indicating that there is no use case for anyone to use more power than that.Thats not what I said at all. How did you pull that from what I said?
Gotta love the user who made an account here just to make pro atc posts lol.
I don't see how one could not draw that conclusion from you stating that 32 watts hits a 100 DB. To me (and everyone that I asked in person [6 people)], myself felt that you are indicating that there is no use case for anyone to use more power than that.
The lowest power amp that I can think of is the Grandson of Ampzilla (that I believe is 40 watts a channel).
So naturally I had to ask.
If that is not what you are saying, and you are just stating a fact for (which to me seems to have no apparent reason for it to be stated), (or if there is a reason that for you stating that),
then obviously I am not understanding WHY you made that statement.
Ok. I got it. Thanks for explaining.I just said a speaker of that sensitivity can hit 100db with 32w. You guys can make up whatever you think I said, but it wasn't "32w is all you need". My point was 100db @1m is more than enough for most spaces and users. If it's a bookshelf, you can't really go much higher than that anyways. Go ahead and spin that whichever way you want.
I made that statement because I saw people being silly about wattage and wanted bring some perspective.
I've heard the 200ASL Pros, the 110ASL Pros, and the 150ASL Pros.Has anyone here listened to the SCM300ASLT or the passive version? I’m very curious to hear someone’s impressions![]()
Working with them regularly. Very impressive, even if the room is not ideal, but then, is there such a thing?Has anyone here listened to the SCM300ASLT or the passive version? I’m very curious to hear someone’s impressions![]()
Why you prefer these vs 300?Can’t say that they are my favorites, I still much prefer 150s and 50s,