AsciLab speakers are about to launch

[kharan]

I want to see the S6C and how it compares to the C6C.

I predict lower THD, lower IMD, more bass extension, higher SPL capability. And also 60 degree wide radiation on each side. Other than that very similar.

To be honest, I want to see what's the THD and IMD are like on the C5C and C6C more, because we already know the Purifi drivers are state of the art whereas Ascilab will have to work hard to get low distortion at higher output levels with the SBA drivers.

 

[AsciLab]

We'd like to share some improved measurements of C6C Prototype. Thanks to beefy 2x8" subwoofers its bass extension could be extremely deep. Most of room will make the bass down to 20Hz easily. And the directivity around 100~200Hz was improved too. A lot of SBIR will be eliminated with this speaker. It's so satisfying result.

There is only several things to adjust and confirm. Almost done..

 

[PatentLawyer]

Wowzers!

 

[Purité Audio]

Your sharing of developments information and measurements is really unparalleled and is hugely appreciated.
Keith

 

[Jasperous]

@AsciLab please make your products available in Canada! These are such amazing products!

Any chance of a floor standing speaker?

 

[Grotti]

@AsciLab please make your products available in Canada! These are such amazing products!

Any chance of a floor standing speaker?

Just combine Sub and Satellite = floor standing speaker

 

[AudioJester]

@Ascilabs - are you able to share distortion measurements? Curious how loud the C6C will go?

 

[fcracer]

Thank you for comparing us with Genelec, a brand known for its top-tier technology in the industry.
As a newly launched speaker brand, we are just beginning our journey and will prove ourselves step by step through continuous verification and improvement.
Our F, C, A, S and cardioid lines are each designed to deliver the best value for their respective categories, and we will strive to establish them as top-tier, cost-effective choices in the market.

I love this. My family has been running successful businesses for more than 40 years. When people ask mom and dad how they managed to do this, their reply is almost exactly the same, “we focus on building our reputation one customer at a time, one transaction at a time, with step by step continuous improvements”. Can’t wait to get a set of Asci Lab speakers!

 

[PristineSound]

@AsciLab, can you please tell me if your speakers pair matched? If so, to what dB and within what frequency range they are pair matched?

 

[AsciLab]

@AsciLab, can you please tell me if your speakers pair matched? If so, to what dB and within what frequency range they are pair matched?

100-10k +/- 0.5dB is our standard.

You can see what Nuyes gets for the deviation result.

AsciLab A6B Review

I sincerely apologize for the significant delay in posting this review. Thank you to everyone who patiently waited. This review marks a milestone, as it is the first time I’ve measured a total of 11 samples simultaneously, thanks to the collaboration of the manufacturer and...

www.audiosciencereview.com

 

[PristineSound]

100-10k +/- 0.5dB is our standard.

Is this for all of your speakers or just certain models?

 

[AsciLab]

Is this for all of your speakers or just certain models?

Most of our models. F series may have a little more deviation but the maximum limit is under 1dB.

 

[PristineSound]

Most of our models. F series may have a little more deviation but the maximum limit is under 1dB.

That is amazing. Really looking forward to your products in the US. Hopefully avoiding all the mess that's going on with customs.

 

[boxerfan88]

Ha ha ha ... somebody complained about misleading information or misinformation ... and recommending a take down of false photo too ...

Ref: https://audiolabinsight.com/t/ascilab/143/660

(translator to English is needed to read the posts)

.

 

[Purité Audio]

Ha ha ha ... somebody complained about misleading information or misinformation ... and recommending a take down of false photo too ...

Ref: https://audiolabinsight.com/t/ascilab/143/660

(translator to English is needed to read the posts)

.

That was entirely my mistake, I used a photograph which I thought was Changyeul and Jinsung in an anechoic chamber ( i thought perhaps before they bought their Klippel NFS) since removed.
Two independent measurements ( by two corespondents who will be very familiar ) of AsciLAB loudspeakers are being conducted in the very near future!
Keith

 

[kharan]

@AsciLab

How does volume control work on your active speakers?

Especially if with a digital input?

 

[AsciLab]

The Ascilab website is finally open!
www.ascilab.com

We are currently running a pre-order event, and all orders placed during this period will receive a 5% discount.
Purchases can be made via PayPal at this time. If you wish to use country-specific card payments through Paymentwall, please note that it may take an additional 1–2 weeks to become available.
If you have any questions, feel free to leave a message here or on the QnA page at Ascilab.com.
Thank you for waiting so long.

 

[Reddoc]

The Ascilab website is finally open!

Congratulations!
Hope you do well.
I am after the S6C and bass module.... looks like a short wait

 

[carlosatl]

The Ascilab website is finally open!
www.ascilab.com

We are currently running a pre-order event, and all orders placed during this period will receive a 5% discount.
Purchases can be made via PayPal at this time. If you wish to use country-specific card payments through Paymentwall, please note that it may take an additional 1–2 weeks to become available.
If you have any questions, feel free to leave a message here or on the QnA page at Ascilab.com.
Thank you for waiting so long.

So can your product be delivered to the USA ? that is the question, your product sells itself honestly.

 

[AsciLab]

So can your product be delivered to the USA ? that is the question, your product sells itself honestly.

Worldwide shipping is available, and you can check the shipping cost by adding items to your cart and entering your address.