AsciLab speakers are about to launch

[kemmler3D]

View attachment 434877View attachment 434878View attachment 434879View attachment 434880View attachment 434881View attachment 434882

We’ve got PTT1.3T Purifi's new tweeter a few weeks ago and finished waveguide design.

Our goal directivity was +/-60 deg as typical recommended constant directivity.
It works to top frequency too. To about 17kHz the beam width keeps wide and constant.

I can’t wait to hear its sound of super constant and wide directivity with extreme low distortion.

PS. We also work hard to prepare international selling, contacting dealers for many countries. Thank you for kind wait and We’ll show our best.

Impressive!

 

[306xx]

That bat just hit my brain!

 

[boxerfan88]

The directivity is nice & even for such a wide frequency range, nice!! Looking forward to your comments about how it sounds to your ears

Is this the prototype A6C?

 

[AsciLab]

The directivity is nice & even for such a wide frequency range, nice!! Looking forward to your comments about how it sounds to your ears

Is this the prototype A6C?

This will be a new model with all Purifi drivers.

 

[Grotti]

Wow, stunningly good!!! I hope though, that the involvement of local dealers won't double the price (like it usually does more or less): regarding the costly drivers and crossover this fantastic speakers could be out of reach for many potential customers.

Nevertheless: I will patiently wait for availability before I decide about a necessary speaker upgrade.

 

[Times]

PS. We also work hard to prepare international selling, contacting dealers for many countries. Thank you for kind wait and We’ll show our best.

I could well imagine opening an AsciLab-only dealership / showroom (from a loudspeaker perspective) in southern Germany... let me know if there is interest.

 

[Matt_Holland]

View attachment 434878

I can’t wait to hear its sound of super constant and wide directivity with extreme low distortion.

Thanks for the update! Looks very impressive?

In the first graph, does that represent 2.83V/1m without crossover?

Can we see the distortion measurement?

 

[JohnnyNG]

This will be a new model with all Purifi drivers.

 

[somebodyelse]

Unless we find out Zoot has been lighting grail-shaped beacons again...

 

[Reddoc]

Quite right, the Holy Grail.
Can't wait to see the measurements- FR, IM distortion, THD wrt sound intensity, air-speed velocity, weight ratios....

 

[Chaos01]

Hi @AsciLab , i saw the Crossover of your C5M in your Forum, nice to see good quality Crossover parts. But i have to ask: dont the Air coils affect each other in that configuration? Like Here in fig.5 would be better? http://www.troelsgravesen.dk/coils.htm
Or is it calculated in?
Crossover Picture link:

어사일랩 (Ascilab) 스피커에 대한 이야기

c5m 크로스오버가 완성되었습니다! 내부에 효과적으로 배치를 하기위해 2층 구조로 되어있습니다.

audiolabinsight.com

 

[artemtch63]

View attachment 434877View attachment 434878View attachment 434879View attachment 434880View attachment 434881View attachment 434882

We’ve got PTT1.3T Purifi's new tweeter a few weeks ago and finished waveguide design.

Our goal directivity was +/-60 deg as typical recommended constant directivity.
It works to top frequency too. To about 17kHz the beam width keeps wide and constant.

I can’t wait to hear its sound of super constant and wide directivity with extreme low distortion.

PS. We also work hard to prepare international selling, contacting dealers for many countries. Thank you for kind wait and We’ll show our best.

Very impressive result!
Are you planning to make C6C with the Purifi’s tweeter?

 

[AsciLab]

Very impressive result!
Are you planning to make C6C with the Purifi’s tweeter?

Purifi Tweeter will be applied in S6B(two way passive bookshelf) and S6C(active cardioid).

 

[songOVERsound]

Purifi Tweeter will be applied in S6B(two way passive bookshelf) and S6C(active cardioid).

Does this allow for a lower crossover point?

 

[AsciLab]

Does this allow for a lower crossover point?

Yes. It allows 1kHz XO same as before.
And even more low distortion.

 

[Mattcc22]

Man, can't wait until we can start buying in the US.

 

[AsciLab]

Man, can't wait until we can start buying in the US.

The website for international sales is scheduled to launch at the end of April, and purchases will be available through the site.
Initially, the available products will be the F6B and C6B, followed by the cardioid line and A6B in sequence. Of course, the S6B is also expected to be released around the same time.

We will provide a full lineup introduction by next week.

 

[Mattcc22]

The website for international sales is scheduled to launch at the end of April, and purchases will be available through the site.
Initially, the available products will be the F6B and C6B, followed by the cardioid line and A6B in sequence. Of course, the S6B is also expected to be released around the same time.

We will provide a full lineup introduction by next week.

This is awesome news! Thanks for the update.

 

[AsciLab]

The prototypes for the final testing of the S6B (A6B), F5C, C5C, and C6C models have been completed. Unless any unexpected issues arise, their exterior designs will remain unchanged.

S6B, A6B
220 x 405 x 300 mm
8.66 x 15.94 x 11.81 in

F5C, C5C
215 x 500 x 260 mm
8.46 x 19.69 x 10.24 in


C6C
252 x 540 x 300 mm
9.92 x 21.26 x 11.81 in

Now that the entire lineup for the launch has been finalized, we will also expedite the previously postponed website launch.

 

[boxerfan88]

Is there some logic to the model numbers? If there is, could you share?

Front alphabet? is the model range?
I think the digit is the woofer size, no?
Back alphabet is version? C=MTM? B=2way, C=2.5way?