• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

AsciLab speakers are about to launch

kharan said:
There may be a mistake in the Spinorama upload. Anything under 300 Hz is about 2dB lower in the new measurement vs the old.

bOa1URJ.png


Also, what's the nominal sensitivity, nominal impedance and power handling of each model?
Click to expand...
A6B data is gonna be updated. As we uploaded newly is the exact reponse.

We elevate tweeter level 1dB higher whole three of models. Our design is narrow dispersion than typical speaker, So regarded sound power and toe out situation.
 
Last edited:
Very nice as always, congrats. Any plans of a WTW center speaker for a home theater front trio?
 
Matias said:
Very nice as always, congrats. Any plans of a WTW center speaker for a home theater front trio?
Click to expand...
Yeah we also have plan about MTM(WTW) style center and front speaker.
Thanks to our low xover, MTM configuration doesn’t have much lobbing error.
 
ascilab said:
A6B data is gonna be updated. As we uploaded newly is the exact reponse.

We elevate tweeter level 1dB higher whole three of models. Our design is narrow dispersion than typical speaker, So regarded sound power and toe out situation.
Click to expand...
The old data already showed a little bit of brightness already, right? The newer versions of my Amphion Argon 3s have a little switch on the back to choose for more tweeter level for the same reason you described. I never saw the reason for it honestly...but one could easily solve this with PEQ the one way or the other....
 
Grotti said:
The old data already showed a little bit of brightness already, right? The newer versions of my Amphion Argon 3s have a little switch on the back to choose for more tweeter level for the same reason you described. I never saw the reason for it honestly...but one could easily solve this with PEQ the one way or the other....
Click to expand...
It was constant rather than being bright.
You can use it 30 deg toe out and it still has constant response.
IMG_0013.jpeg
 
That is a pretty thing.
Keith
 
So, I wonder how much a speaker condom sweater would affect the sound the Ascilab speakers, this is what they used with the Lyngdorf CUE-100.

It should be able to cover the tweeter part, I don't know if the woofers are recessed enough in the Ascilabs.


(time code embedded, you don't need to watch the whole thing)

Also, I'm noticing that the CUE-100s are using the aluminium cones, same with the Sointuvas and the Ascilabs, but the Clarity 6.2 are using fiber mix cones. There are probably good reasons for each, but they are escaping me at the moment.
 
Maybe special order - no ring - industrial look :)
 
Grotti said:
The old data already showed a little bit of brightness already, right? The newer versions of my Amphion Argon 3s have a little switch on the back to choose for more tweeter level for the same reason you described. I never saw the reason for it honestly...but one could easily solve this with PEQ the one way or the other....
Click to expand...
Not everyone uses PEQ. Maybe its just me, but I would rather have the most 'honest' speaker possible without PEQ.
 
Last edited:
Grotti said:
The old data already showed a little bit of brightness already, right? The newer versions of my Amphion Argon 3s have a little switch on the back to choose for more tweeter level for the same reason you described. I never saw the reason for it honestly...but one could easily solve this with PEQ the one way or the other....
Click to expand...
More treble is not what Amphion 3S needs.

hometheaterhifi.com

Amphion Argon 3S Bookshelf Speaker Review - HomeTheaterHifi.com

The Amphion Argon 3S is a compact but weighty stand-mount loudspeaker from Finland.
hometheaterhifi.com hometheaterhifi.com
 
ivanj said:
Not everyone uses PEQ. Maybe its just me, but I would rather have the most 'honest' speaker possible without PEQ.
Click to expand...
PEQ is pretty handy for low bass, but I don’t use it above that, with good speakers there is simply no need.
Keith
 
You must log in or register to reply here.

Similar threads

amirm
  • Poll Poll
Ascilab C8C Active Speaker Review
48 49 50
Replies
990
Views
138K
badtimeticket
B
amirm
  • Poll Poll
Ascilab A6B Speaker Review
14 15 16
Replies
304
Views
72K
azzy_mazzy
azzy_mazzy
amirm
Ascilab C8C V1.1 Measurement Update
7 8 9
Replies
164
Views
44K
maltesercross
M
C
In search of (non-coaxial) speakers with wide vertical dispersion
Replies
2
Views
389
dualazmak
dualazmak
G
Endgame passive bookshelf shootout: KEF Reference 1 Meta vs. Ascilab S6B
6 7 8
Replies
156
Views
20K
Purité Audio
Purité Audio
Back
Top Bottom