AsciLab speakers are about to launch

[cfdj]

Not sure if this was mentioned but I was wondering wether bx8c can be used with different speakers than ascilab. I could not find any manual for those so not quite sure about this. It would be nice to have that confirmed or get some technical/manual document.

 

[Grimoire]

Not sure if this was mentioned but I was wondering wether bx8c can be used with different speakers than ascilab. I could not find any manual for those so not quite sure about this. It would be nice to have that confirmed or get some technical/manual document.

No, they can't.

 

[Salt]

You can customize any speaker, driven by a hypex module, by it's own software ... of you are aware what you're doing...

 

[cfdj]

No, they can't.

Any particular reason fo this or reference of this information you’d want to share?

 

[Grimoire]

Any particular reason fo this or reference of this information you’d want to share?

They are designed to work with the C8C, nothing else. AsciLab have stated as much.

 

[cfdj]

You can customize any speaker, driven by a hypex module, by it's own software ... of you are aware what you're doing...

My understanding of this is that it would be possible if Ascilab would allow us to edit some config instead of just exposing some locked preset. Is that the case?

 

[kharan]

Any particular reason fo this or reference of this information you’d want to share?

General knowledge about the design of the bass stand mostly..

Its crossover is configured so that it turns the C8C into a five-way speaker with a specific directivity pattern. It's not a generic subwoofer.

You could technically wipe out the saved crossover in the bass stand and upload your own, but it would become a generic subwoofer, and you'd better off buying just that.

 

[cfdj]

General knowledge about the design of the bass stand mostly..

Its crossover is configured so that it turns the C8C into a five-way speaker with a specific directivity pattern. It's not a generic subwoofer.

You could technically wipe out the saved crossover in the bass stand and upload your own, but it would become a generic subwoofer, and you'd better off buying just that.

Thanks! I understand it’s no ordinary subwoofer however I’m still curious what’s there to be setup in order this to work with other speakers that also have specific directivity. Then it would be matter of crossover and some timing adjustment? Or is there something more to it?

 

[kharan]

Thanks! I understand it’s no ordinary subwoofer however I’m still curious what’s there to be setup in order this to work with other speakers that also have specific directivity. Then it would be matter of crossover and some timing adjustment? Or is there something more to it?

There are no speakers with the same directivity unless it's the exact same model or a reverse engineered clone.

 

[Salt]

Basically You can override any crossover of a hypex DSP ... if You know what You're doing ..

 

[AsciLab]

Thanks! I understand it’s no ordinary subwoofer however I’m still curious what’s there to be setup in order this to work with other speakers that also have specific directivity. Then it would be matter of crossover and some timing adjustment? Or is there something more to it?

BX8C can’t be used with the other speaker.
It has quite complex filters. It is not stand alone cardioid subwoofer.

 

[kharan]

Hi Ascilab, how far in the writing are you with the manuals?

 

[AsciLab]

Hi Ascilab, how far in the writing are you with the manuals?

AsciLab Manual - Google Drive

drive.google.com

We uploaded the manual in the shared folder.
It will be attached as a QR code. This is V1.0 so there may be a bit to be updated.

 

[BetweenThePeaks]

Looking for very stable speaker stands for AsciLab C6B.

Requirements:
High stability (two cats at home, so tipping resistance is critical) ,metal or aluminum construction with option to fill with sand, spikes or solid feet, height 60cm, top base surface that match the speakers base, ease to find and purchase in EU.

 

[BELGIT]

@AsciLab how to obtain the optional extension feet with vibration isolation for the ascilab C8C and BX8C please?

 

[kharan]

@AsciLab how to obtain the optional extension feet with vibration isolation for the ascilab C8C and BX8C please?

They come with the BX8C as part of the package, if I recall correctly.

 

[staticV3]

Looking for very stable speaker stands for AsciLab C6B.

Requirements:
High stability (two cats at home, so tipping resistance is critical) ,metal or aluminum construction with option to fill with sand, spikes or solid feet, height 60cm, top base surface that match the speakers base, ease to find and purchase in EU.

These look stable and a good match for the C6B's dimensions: https://www.audiosciencereview.com/...eakers-are-about-to-launch.54794/post-2523081

Probably worth asking the author for the model.

 

[pat355]

has anyone already received them? (C8C+BX8C)

 

[slaweks]

has anyone already received them? (C8C+BX8C)

Unlikely, but has anyone received C8C alone, at least?

 

[Grimoire]

Unlikely, but has anyone received C8C alone, at least?

I'm still waiting for mine...