• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

An update on my power problems at home and I need help picking a whole house surge protector and power conditioner.

J.M.

Active Member
Joined
Dec 30, 2023
Messages
214
Likes
119
Good afternoon everyone. I hope everyone is doing well. So, I have talked about in my past posts electrical problems in my house with the coffee pot and my lights flickering and 3 rooms on 1 breaker. Well, I have finally pulled the trigger and I am getting a new running wire and circuit in my panel for only the coffee pot to element that amps draw. So, no more flickering lights. I am also getting the plug in GFI in my bathroom taken out and I am also getting a new running wire and dedicated breaker for the bathroom plug by it self and a gfi breaker on the bathroom only. So, these problems are taken care of. Now I would like to have them install a new whole house surge protector and power filter or conditioning device next to my main panel. It is listed at 150 volts and 22KA . So an 100Ka is good for my house because I have some smart appliances and now our newer phones as well and tv’s and so on. I can always confirm it with my electrician who is coming by when he has a free moment. I have been waiting for 3 weeks now and hopeful soon. Am excited and relieved this issue will be solved soon. Also I will not have to buy anymore power conditioning product for my house. I hope this all makes sense to everyone? Am not an electrician so, I am trying my best to explain what’s going on? Be safe. Jeff
 
A lot depends on your local supplied voltage. If it's 120VAC, a protector should fire at 120 x square root(2), or around 175V peak.

The 150V rated one might be good if your voltage is 100VAC, as is used in some places in Japan.
 
The numbers you quoted are more likely to be KVA rather that KA, because 150V X 22KA is 3.3 MW and for a residential home that unlikely. Why not just protect you audio gear? You don’t need to protect the whole house supply?
 
Whole home surge protection located at/in/near the main panel is always good.
While 'power conditioning' can mean several different things ans seldom accomplishes much.
 
If you had three rooms on one breaker and no GFCI in the bathroom, I wonder what other wiring issues you may. A surge protector or power "conditioner" is not going to fix bad wiring. Power "conditioner" is more of a marketing term that probably won't help.

A UPS and/or isolation transformer would provide more protection than a power "conditioner". I have a UPS on my audio system to prevent electrical dropouts during a storm and a UPS and homemade balanced isolation transformer on my computer system.

Still, a whole house surge protector is a good idea. I have three on my house - one on the AC unit, one on the main breaker panel, and another on the sub panel. But I live in an area with lots of lightning. Even with all that, a recent lightning strike took out three GFCI outlets, a lighting timer, and a solar-powered security camera.
 
If you had three rooms on one breaker and no GFCI in the bathroom, I wonder what other wiring issues you may. A surge protector or power "conditioner" is not going to fix bad wiring. Power "conditioner" is more of a marketing term that probably won't help.

A UPS and/or isolation transformer would provide more protection than a power "conditioner". I have a UPS on my audio system to prevent electrical dropouts during a storm and a UPS and homemade balanced isolation transformer on my computer system.

Still, a whole house surge protector is a good idea. I have three on my house - one on the AC unit, one on the main breaker panel, and another on the sub panel. But I live in an area with lots of lightning. Even with all that, a recent lightning strike took out three GFCI outlets, a lighting timer, and a solar-powered security camera.
So, my bathroom has a plug in gfi that cost me $80.00 with shipping. I just replaced the old one that kept tripping. That took care of that issue. The guy putting new my electrical isolated circuits so there is no issues in my power supply. The coffee pot will have a new wire and a dedicated breaker just for the coffee pot. The bathroom is having the gfi plug out and putting a regular outlet in place of it due to running a new isaloted line and break for just the bath room. so, that will be 1 room and 1 appliance off that breaker line. My refrigerator is on it’s on line now as well. So, that’s actually 3 issues taking care of. I am also putting a new electrical box next to the old one to bring the house up to code so we can sell in a few years. A little at a time is all I can pay for. The power conditioner I can take out of the picture no problem. I will have the electrician will go through my issues and breaker box before even starting the Job. I will also have a gfi breaker in the bathroom now.
 
even if it is a GFI breaker?
 
I was told it is a code violation nowadays. So, back in 1980 it was okay but, thankfully the codes have changed and are more strict and more effective in protecting the home and the environment. I did ask an electrician where’s the new electricians code book for 2026? I was told it’s all on line now? There has to be a new code book due to electrical journeyman going to school. I will be looking and buying a new electrical. code book. I need to be updated. 1 of the new codes is an out let under a drinking fountain has to have a gfi but, it doesn’t need to be covered now as of 5 years ago it had to be covered? To me that’s an odd code to go back on?
 
GFI breakers and surge protection are different ideas. Or at least they are the UK.

GFI (or "RCD" in UK) detects a current imbalance between live and neutral on a circuit. Any imbalance means there is current flowing to ground, possibly through a body, which is not nice.

I'm not sure about US regulations, but I'm glad every breaker in my fuse box (for every circuit) is the RCD type!
I don't know how the OP's house is wired, but I'd take a wild guess and say it does not sound safe, and if it were me, I'd look at doing a full re-wire and a new fuse box (with full RCDs in it!).
 
Good afternoon everyone. I hope everyone is doing well. So, I have talked about in my past posts electrical problems in my house with the coffee pot and my lights flickering and 3 rooms on 1 breaker. Well, I have finally pulled the trigger and I am getting a new running wire and circuit in my panel for only the coffee pot to element that amps draw. So, no more flickering lights. I am also getting the plug in GFI in my bathroom taken out and I am also getting a new running wire and dedicated breaker for the bathroom plug by it self and a gfi breaker on the bathroom only. So, these problems are taken care of. Now I would like to have them install a new whole house surge protector and power filter or conditioning device next to my main panel. It is listed at 150 volts and 22KA . So an 100Ka is good for my house because I have some smart appliances and now our newer phones as well and tv’s and so on. I can always confirm it with my electrician who is coming by when he has a free moment. I have been waiting for 3 weeks now and hopeful soon. Am excited and relieved this issue will be solved soon. Also I will not have to buy anymore power conditioning product for my house. I hope this all makes sense to everyone? Am not an electrician so, I am trying my best to explain what’s going on? Be safe. Jeff
Some years ago my power company offered whole house protection for a monthly fee. My sister lived in an area prone to lightening strikes, so she got it.

I also installed a battery backup for her computer.

Then lightening struck near the house, and her computer stopped working. I checked her backup, and the whole bottom was black, along with the desk beneath it.

After replacing the UPS, everything still worked. Im still wondering what the whole house protection was supposed to do.
 
City libraries often have a copy of the NEC code book because the Authority Having Jurisdiction (city or state) writes the NEC into its laws.
Note that many A.H.J.s don't write the newest code cycle into law. A city may be 3, 6 or even 9 years behind the latest and greatest.
 
Some years ago my power company offered whole house protection for a monthly fee. My sister lived in an area prone to lightening strikes, so she got it.

I also installed a battery backup for her computer.

Then lightening struck near the house, and her computer stopped working. I checked her backup, and the whole bottom was black, along with the desk beneath it.

After replacing the UPS, everything still worked. Im still wondering what the whole house protection was supposed to do.
No surge protector or UPS will stop a lightning strike directly on a house or nearby wiring. Many hundreds of millions of volts and tens of thousands amps. It can and will literally vaporize anything in its way.

A "whole house" surge protector is designed to protect against the thousands of routine surges that most houses see yearly. These surges typically have nothing to do with lightning, which is in a destructive class all its own.
 
The numbers you quoted are more likely to be KVA rather that KA, because 150V X 22KA is 3.3 MW and for a residential home that unlikely. Why not just protect you audio gear? You don’t need to protect the whole house supply?
It will be KA. It is a fault current rating, not an operating current rating. - how high a pulse current it can bypass so it doesn't get into the house. Needs to be pretty high if it's going to crowbar the results of a lightning strike in the neighbourhood, for example. (@GS430man not talking about a direct strike to incoming power lines here)

The 150V is almost certainly an AC rating - above this and it will start to clamp. You need at least that sort of headroom from a 120V supply to ensure it doesn't try to clamp normal operating voltages.
 
Last edited:
Back
Top Bottom