3D print files for driver mounting

[Bryguy]

I have 3D printed a trim ring for the Peerless FSL-0512R01-8
https://www.printables.com/model/1795475-peerless-fsl-0512r01-8-trim-ring
More to come. Feel free to post your own models if you have any. The link includes stl and step, but I can post the actual CAD document (Onshape) if desired

 

[technodanvan]

This is nice, and for such a great driver too!

 

[Bryguy]

GRS PT6816-8 Open Baffle Face Plate​

GRS PT6816-8 Open Baffle Face Plate by Bryguy92

For GRS PT6816-8 8" Planar Slim Tweeter 8 OhmNo supports required. The mounting holes are for M3 screwsThe two holes on the bottom are 3.5mm diameter

www.thingiverse.com

 

[Bryguy]

Btw here is the same fsl trim ring on thingiverse. I'll be posting there from now on

Peerless FSL-0512R01-8 Trim Ring by Bryguy92

The FSL become a pretty handsome driver once you add the ring.I have not performed any before/after measurements, but I'm sure it cuts down on diffraction from the lip as well.Settings I used:4 wall loops30% gyroid infill.16mm layer height.2 .2 fuzzy skinI used CA glue to mount it

www.thingiverse.com