yamaha

  1. D

    Why does my Yamaha setup sound better than the Luxman 595?

    I have the Luxman 595 class A amp. I also have the Yamaha r-n2000a used as a preamp to the Yamaha AS-3200. Ether system will use the same Sonus Faber Lumina II speakers. These speakers could be considered on the bright side. I don't know why, but the Yamaha setup (preamp and amp) sounds a bit...
  2. D

    Yamaha r-n2000a loudness adjustment - does it adjust the mids?

    I own the Yamaha r-n2000a which has a loudness adjustment. It sounds like it adjusts the mid frequency to my ears, but I can not tell for sure. Is there a way to look at the specs to find out what exactly the loudness adjustment knob changes?
  3. Y

    Experienced Eagle Software operator needed to create Gerber Files

    I have a constant need to reproduce circuit boards, some are 1 for 1 replacements and some need modifications. Attached is an example of what I can provide for someone to work from:
  4. K

    Yamaha MX-2 terminal change

    Is there a way to change the binding posts on my Yamaha mx2 to accept banana plugs or spades instead of bare wire?
  5. T

    Recomendation of stereo amplifier for JBL E90

    Hello from Lithuania! Im stuck on choosing new stereo amplifier for my JBL E90 towers, specs in link https://www.hifiengine.com/manual_library/jbl/e90.shtml Im considering Denon DRA-800H or Yamaha R-N803. Im more like into bass and hip hop/rap music. At this moment I have old yamaha rxv450, but...
  6. Thunder

    Best budget studio monitors?

    Budget $200 for each Some examples: KRK Rokit RP5 G4 Yamaha HS 5 Adam T5V
  7. S

    Rokit vs Yamahas vs LP-6 to use with a TV in untreated living room?

    I'm fairly set on using studio monitors for my tv+ listening to music in the living room. Been considering the rokit rp7 , yamahas hs7 and the kali audio lp-6 ; mainly because they all come in white lol. I know they are all near field monitors, but which ones do you think would work best in...
  8. N

    Amplifier/DAC for Heco Aurora 700 speakers

    Hello everyone! I'm building my first setup and recently bought Heco Aurora 700 speakers and thinking about amplifier/DAC stack. Audio source - PC. So here is my choices, what I'm able to find in my small (Estonia) market: Yamaha A-S701, No USB input, 650 Eur. Yamaha A-S801, USB, 840 Eur...
  9. WaynesterUK

    Pro Musician needs new speakers for home studio

    Hi everybody, need a bit of help… I’ve got a Behringer QX1832USB Mixer at home, all my 6 x keyboards go into it in STEREO, then from the desk it goes into my Yamaha HS7 Speakers, no matter what EQ settings I try and play with on the desk, my Korg Kronos and Yamaha Montage (when playing pianos)...
  10. P

    SPEAKERS FOR BEDROOM (10x10ft)

    hi all, i wanted to connect a couple of good speakers to my Yamaha CA-610 amplifier in my bedroom, which measures 10 x 10 ft. I would like to use the stands placed at the corners, main use for listening to music, I would not like to use the subwoofer, only if necessary .. thanks to this forum...
  11. X

    24/192 audio from FireTV Cube to Yamaha TSR-5830

    Hi folks, new to the site, did a little digging but found nothing quite on target. I have a Yamaha TSR-5830 receiver connected via HDMI to a FireTV 4K 2nd-gen that I see supports 24-bit/192kHz audio, and it indicates that the content I'm playing is of that quality but my device capability is...
  12. C

    Yamaha hs5 with Bluetooth bridge

    Looking for some advice please! I have a Yamaha hs5 studio monitor. I don’t use it for production or anything just wanted a speaker with good sound quality. Currently connect with an aux but looking to get a Bluetooth bridge so I no longer have to use the cable. This is more for convenience...
  13. TheBatsEar

    Inside Yamaha amps

    Anyone interested in looking inside Yamaha amps? I have a bunch in my collection, most of them need repair, all of them have to be opened eventually for dusting. I'll start with some pictures i made inside a A-S1000 that i bought for 500€ in mint condition. This one weighs 25kg, it's a serious...
  14. skaveesh

    Yamah RX-V585 presence speakers loud distorted sound issue

    Hi All, When I got the receiver there were no issues with this unit until today, that I discovered overhead (presence) speakers are making a very loud distorted noise along with the audio. I was about about to watch a Atmos movie today when I first found this issue. Week ago I watched Atmos...
  15. S

    AVR Speaker Impedance Selector

    Greetings! I've a question regarding modifying default speaker impedance on my AVR, Yamaha RX-V583. The thing is that US models have selector for 6 and 8 ohms, and I guess almost everybody would use them in 8 ohms position to allow higher voltage supply to an amplifier. The problem is that my...
  16. O

    AVR Decisions - Anthem, Arcam, Denon, Yamaha...?

    Hi, folks. As a few of you might remember, I've recently bought a 4k UHD television followed by a Panasonic DP-UB820 player. I'm in the process of designing a new equipment cabinet in an attempt to overcome my wife's objections to the tendency of AV black boxes to procreate when she's not...
  17. dkinric

    New Yamaha Integrateds with VU Meters

    Part of the A-Sxx00 series, analog only, 3 new models. https://www.whathifi.com/us/news/yamaha-a-s1200-a-s2200-and-a-s3200-stereo-amplifiers-sport-vu-meters
  18. pma

    Review and Measurements of vintage Yamaha AX-396 integrated amplifier

    Review and Measurements of vintage Yamaha AX-396 integrated amplifier This review shows measurements of Yamaha AX-396 integrated amplifier, ser. no. Y399871TV, made in Malaysia. I bought this amplifier in the year 2002 and have been using it shortly. Then it was sleeping in my stock and 5...
  19. M

    What do you think of the Yamaha R-N803 Stereo Receiver?

    https://sg.yamaha.com/en/files/Yamaha%20R-N803%20Product%20Information_b91c924acac9108d9990dccd961075fb.pdf Looks like a pretty good all-in-one box. Any experience with or thoughts on it? I would mostly use it with Qobuz, Net Radio, and AirPlay.
  20. Nationalizer

    Different sound tuning for different markets / continents for the same product?

    I just saw this old video and I just think it's wrong on so many levels. If this is a marketing video, it's very bad. NO ESD grounding, opening it on the carpet and not the right soldering tip. Also, what if I want the ORIGINAL sound? Not to mention all these will MEASURE differently. And...
Back
Top Bottom