sample rate

  1. M

    Help repairing digital errors in a song

    Hello, someone has sent me a digitization of a cassette tape album, it's 40 minutes long, but at times you can hear this garbled digital artifact, which sounds like they had the wrong settings for sample rate when they recorded it, here is an example...
  2. O

    Help with understanding sampling rate for DSP.

    Hi, quick question. I’m looking at the DMP-A8 and its DSP capabilities. I see people talking about the fact that the DSP resamples hi res audio to 48khz. On this site I thought it was pretty well established that “hi res” audio (specifically its sampling rate for the purposes of this discussion)...
  3. PaperBoat

    Upsampling and Aliasing.

    I asked ChatGPT the following question: Upsample before or after DSP to remove aliasing in audio? ChatGPT answered: To remove aliasing in audio, it is generally recommended to perform upsampling before digital signal processing (DSP). Aliasing is a phenomenon that occurs when signals are...
  4. T

    Which bit and sampling rate to feed a minidsp?

    I tried to understand this, and looked for answers all over, but couldn't really. I'm lost at the beginning of the learning curve and can't find my way back. I use DDRC24. I stream directly from Qobuz in my notebook, then to the DDRC, then to amp (a hypex nc252), and to jbl arena120 and svs...
  5. S

    Qobuz or Amazon Music

    Hello ASR, Apologies for asking an opinion based topic on a forum about science. However, 'bit-perfect' is something to take note of here, as it is something that Qobuz supports and amazon HD does not. (Of which I lack fundamental knowledge of - so more informed people can provide insight as to...
  6. E

    Topping E30 - when input sample rate changes: no sound

    Dear fellow music lovers, Since a few month I use a Topping E30 in dac modus in my music system. I ‘m very content but for one thing. I have to switch the input back and forth in order to hear music when the sample rate of the signal changes. Let’s give an example. The streamer (Logitech...
  7. scherbakov_al

    Sampling problem around multiple frequencies

    I tried an experiment. I generated a sinusoidal signal, the frequency of which ranged smoothly from 11999Hz to 12001Hz over 300 seconds. The sampling rate was 48000Hz. The bit depth is 32. I did this inside the Izotope program. I also did the same by connecting the balanced output of my S.M.S.L...
Back
Top Bottom