minidsp 2x4hd

  1. S

    What ADC and DAC to pair with CamillaDSP for subwoofer room correction?

    I'm currently using a MiniDSP2x4HD for room correction on my four subwoofers, but I was looking to try out CamillaDSP on my computer since it can support more filters than the MiniDSP2x4HD. Currently, I have a single RCA connection going from my AVR to miniDSP2x4HD and then four RCA connections...
  2. S

    Optimizer for both impulse and frequency room response on multiple subwoofers with MiniDSP2x4HD

    I've been playing around with my MiniDSP2x4HD and four subs to simultaneously optimize both frequency response and impulse response. I wrote an optimizer to simultaneously optimize for both. This is what Dirac Live does for speakers, and possibly for subs with Dirac Live Bass Control (DLBC), but...
  3. D

    My MiniDSP 2X4 HD is Kaput-Upgrade time-FLEX or Latest 2X4 revision?

    I'm new to the forum, so please be kind. My MiniDSP 2X4 HD (Board revision R1.2 board dated Jun 06 2016) has stopped working. I have updated the firmware to the latest revision (MiniDSP Device Console Setup 1.1.17.exe) and had to install a new USB driver etc as per instructions included. This...
  4. J

    Earthing sparks? (ft. Rega Schiit iFi miniDSP & Topping)

    First time poster :). I ran into a ground hum problem (very loud) in the following chain: Rega P1 TT ----> Schiit Mani/iFi Zen Phono (doesn't matter which one) ----> miniDSP 2x4 HD (rca in--rca out) ---->Topping PA 5 x 2* ----> DIY LXmini speakers. (*The RCA to TRS cables for interfacing the...
  5. V

    Help with system: Dual Subwoofers, DSP Options, and General Audio Advice

    Hi All, Intro I've been a long time lurker and always check for measurements / reviews on this site & others prior to purchasing any home audio gear. Really appreciate all the work and information this forum provides as it can provide a "reality check" for those emotional / impulsive purchases...
  6. R

    Digitally reducing volume when connecting DSP directly to power amplifier

    My current setup takes all its different inputs into a MiniDSP 2x4HD which acts as my DAC, and the output is connected directly into the power amplifier (main in) of my NAD C352 (80W per channel). Volume is controlled on the DSP. Currently, to get output volume at 0dB on the DSP that's not too...
Back
Top Bottom