microphone

Toronto Surplus & Scientific has a large inventory (245pcs) of used NTI M2010 microphones for sale, with the current exchange rate they are $255 USD + shipping on eBay. This microphone is currently $1395 direct from NTI. I have no affiliation with Toronto Surplus, I just thought other speaker...

Purchased at Amazon in hope of obtaining some "free" gain for dynamic microphones. Admittedly, I was lured by the comment made in the name of Ramesh Singaram: Clean gain? Initial voice recording sounded distorted, so I decided to measure the device. All done via loopback on Audient ID4 mk II...

I read somewhere years ago that perhaps crinacle used the apple dongle's ADC via an adapter to measure equipment because apple dongle's ADC is the best of all USB-C dongles. I think this is true. It is not studio quality, but it does support 24/48 PCM recording in mono and does not have as much...

I use a "headset cable" on my AKG K371 headphone: It has a P3 connector, a splitter divides it into two P2 connectors, one for the headphone output (plugged into my Loxjie D10 DAC) and another for the microphone input (plugged into the computer's front or back panel). As soon as I plug the...

Hi there friends. I've been around the forums for a little while though but this is my first forum post. I've mostly just been here for troubleshooting, reviews, hardware measurements and general knowledge. Want to take a second to thank everyone especially Amir for the endless amount of...

Hi all, Created this thread to find mic preamps that will be good enough (and hopefully not too pricey) to match the Cosmos ADC's level of performance. How are the preamps below? I'm new to this but they appealed to me after a day of searching and shortlisting. Curious about any other...

I want to properly wire a Primo EM272 electret microphone capsule (specs) to use with battery-powered as well as mains-powered (mic->interface->PC->mains) recorders. Which of these cable layouts would be the correct choice? And Why? Thank you so much for your help!

It would be nice if i got some help. I am looking to buy a Mic with a usb. My microphone that i am currently using is a blue snowball which is pretty damaged. My criteria is the price cant be more than $150, and if the mic have som noise filtering it would be nice because of my clicky keyboard...

Hi ! I bought these for cheap because of the XLR . One of the XLR Pins is left untouched lol . Too much fake . I can get some audio with Noise Reduction applied . But still petty bad , nontheless , I want to plug in to a Phantom power interface . 48V . But looking at the circuit it is all...

Apples to oranges or pear-to-pear networking, that is the question. https://www.lewitt-audio.com/microphones/lct-recording/lct-540s So that on top is the bog-standard hearing threshold curve for sinusoidal stimuli, I assume. Now what would have happened if they chose another analysis...

I have a few headphones but am thinking of using my DT770 at work, listening to flac and qobuz but also when needed during the day MS Teams and Zoom meetings, 3.5 microphone jack will go into computer or DAC/ADC seen the ModMic which acts as a headset boom mic which is what I am after but are...

Here's the situation. I want to do my job while listening to music through my HE-4XX. I like how convenient the music fades out when the phone rings and then resumes when the call is done. So I want a bluetooth microphone to make this work for me properly. Anyone else use a combination of wired...

In another thread there was some discussion of matching levels for test tracks, and the topic of how to measure levels came up, so I tried a quick comparison. The phone was balanced on top of the UMIK, so it's mic was only about a centimetre away from the UMIK's capsule: In a quiet room I get...

Asking on behalf of someone who wants to record woodwind instruments (bassoon and sax). I believe he is going to for a Behringer XM8500 mic and given the quality of the mic, it's not clear that it's worth spending more on an anti-vibration stand. My guess is vibration would be evident in low...

I am looking to find some bare cable (no attached connectors) to repair my Audio Technica ATH-G1. What I am having trouble with is finding a 4-5 conductor cable that is close to 4mm and has a silicone outer insulation. From my understanding even though the current cable has 6 conductors (5 that...

Hi! I'm thinking of buying a new microphone(Røde Podmic. This one) which has an XLR connection, it's a dynamic mic, I was told this is the mic to go for if there's background noise etc in the room. I'm just going to use it for communication while gaming. Today I have a USB microphone(Thronmax...

Looking to buy a used in good condition MiniDSP UMIK-1 microphone for REW measurements. Let know if you have one for sale.

I am new to REW and measurements in general, read some tutorials and did my first ones using the gear that I already have: a Focusrite Scarlett 6i6 2nd gen USB audio interface, and an M-Audio Nova cardioid, side address, large diaphragm condenser mic. The Nova is not made for measurements, so...