microphone

Hello guys. Currently im using Audient id4 with Sennheiser HD 600 headphones and a shure sm7b microphone. I added a dynamite to the microphone, but it is still underpowered. I'm looking to add speakers, maybe like the KEF Q150, and was wondering how to have all these 3 things working well...

Can a 2x2, 24/96 capable (UAC1) audio interface for a mere 65€ from Thomann's house brand be any good? Well, I just happened to need something to take care of an XLR condenser mic so I could finally liberate the Audient EVO 4 from my office PC and use it for portable measurements again, and I...

Hi guys, I got a few IEMs cables with integrated microphones (MMCX, 2 pin, etc.) and 3.5mm termination. For now, I use the Apple USB-C dongle. It works, but for lot's of music it just doesn't get loud enough on my Android phone. Do you have suggestions that are in a dongle form factor that are...

I need it for conference calls and listening to music on my phone and laptop (Android and Ubuntu). It should have a 3.5mm input with 4 pins for a headset with a microphone and be portable and small in size. I would pay $30 if its only good enough for conference calls or up to $70 if I can use it...

I am looking for a microphone for Digital Room Correction at home, and saw the HiFiBerry Measurement Microphone for 65€: https://www.hifiberry.com/shop/accessories/mic/ HiFiBerry published a short comparison here: https://www.hifiberry.com/blog/measurement-microphones/ Does anyone know more...

So I'm looking to add a microphone solution into my set up. I have a PC (used for gaming / casual use) and I have my Fiio K7 as DAC / AMP and headphones plugged into that as well as using the Fiio as a pre-amp for Edifier speakers. I was looking at the modmic wireless which presumably I just...

I was wondering if one could flatten out a microphone by inverting the frequency response found in a graph. I would like to get a taste of the result without having to buy an expensive microphone for this... There's a Superlux microphone, which is pretty cheap, but requires an audio interface...

I tried to use my audio interface with a Rode NT-1 in a shock mount to the side and it worked quite well, but when I have to take notes during a meeting, it would pick up the mouse clicks and typing on the keyboard way too much. I had to constantly mute and unmute the microphone. I got a bit...

To reduce mic setup footprint, I was looking at desk clamped boom arms. However, it seems like good, professional quality units are well into the 3 figures USD. I really don’t want to spend more for a stand than the value of my modest MXL mic, so I was wondering if anyone has tried any of the...

Hello all, Any thoughts about how to increase the volume of the mic for voice when using bluetooth? Note: the problem occurs on my iPhone 13 and also on my RealMe 3 Pro. Other people on the call can barely hear me, but it does not occur when connected to my laptop, where the mic volume is...

Toronto Surplus & Scientific has a large inventory (245pcs) of used NTI M2010 microphones for sale, with the current exchange rate they are $255 USD + shipping on eBay. This microphone is currently $1395 direct from NTI. I have no affiliation with Toronto Surplus, I just thought other speaker...

Purchased at Amazon in hope of obtaining some "free" gain for dynamic microphones. Admittedly, I was lured by the comment made in the name of Ramesh Singaram: Clean gain? Initial voice recording sounded distorted, so I decided to measure the device. All done via loopback on Audient ID4 mk II...

I read somewhere years ago that perhaps crinacle used the apple dongle's ADC via an adapter to measure equipment because apple dongle's ADC is the best of all USB-C dongles. I think this is true. It is not studio quality, but it does support 24/48 PCM recording in mono and does not have as much...

I use a "headset cable" on my AKG K371 headphone: It has a P3 connector, a splitter divides it into two P2 connectors, one for the headphone output (plugged into my Loxjie D10 DAC) and another for the microphone input (plugged into the computer's front or back panel). As soon as I plug the...

Hi there friends. I've been around the forums for a little while though but this is my first forum post. I've mostly just been here for troubleshooting, reviews, hardware measurements and general knowledge. Want to take a second to thank everyone especially Amir for the endless amount of...

Hi all, Created this thread to find mic preamps that will be good enough (and hopefully not too pricey) to match the Cosmos ADC's level of performance. How are the preamps below? I'm new to this but they appealed to me after a day of searching and shortlisting. Curious about any other...

I want to properly wire a Primo EM272 electret microphone capsule (specs) to use with battery-powered as well as mains-powered (mic->interface->PC->mains) recorders. Which of these cable layouts would be the correct choice? And Why? Thank you so much for your help!

It would be nice if i got some help. I am looking to buy a Mic with a usb. My microphone that i am currently using is a blue snowball which is pretty damaged. My criteria is the price cant be more than $150, and if the mic have som noise filtering it would be nice because of my clicky keyboard...

Hi ! I bought these for cheap because of the XLR . One of the XLR Pins is left untouched lol . Too much fake . I can get some audio with Noise Reduction applied . But still petty bad , nontheless , I want to plug in to a Phantom power interface . 48V . But looking at the circuit it is all...

Apples to oranges or pear-to-pear networking, that is the question. https://www.lewitt-audio.com/microphones/lct-recording/lct-540s So that on top is the bog-standard hearing threshold curve for sinusoidal stimuli, I assume. Now what would have happened if they chose another analysis...