interface

Apparently Fender has acquired Presonus and is launching some Fender-branded USB interfaces: They look nice and they have some pretty good converters that perform well but... no gain on the guitar inputs. Why Fender...? Why? :facepalm:

I'm currently using an Apple USB-C to 3.5 mm adapter (MU7E2ZM/A-AP) connected via a Ugreen USB-C 3.1 (female) to USB-A 2.0 (male) adapter to link my Samsung S95C TV to a pair of Genelec monitors. It mostly works fine, but when using Spotify, I notice intermittent clicks and pops. The issue seems...

Hello everyone. I apologize if this is not the appropriate place for thread. I'm looking for an upgrade from my current interface(s). I started with a UMC204HD, then on a Scarlett 6i6 (mistakenly bought a 1st gen on eBay :) - no big deal, it has served me well.) Desired price range: Under...

Hey, I have an E2x2 and need to record a Podcast for Uni and wanted to know whether I could somehow use the Headphone out + Line out to connect two different pairs of Headphones to this Interface. Very Important --> Would the Monitoring feature even work even if the Line out could also be...

This is a review and measurements of the M-Audio M-Track Solo audio interface. It is very much a budget offering, costing around $40 on Amazon US. I bought it for myself as a cheap interface for my bass guitar, but as you'll see from the results it can't do that job. On the other hand it is...

Hey there, i read to much about faulty units , still want to purchase a topping (combo?) for cans (Arya Organic) and monitors (Genelec 8331) which combo would you recommend that doesn't explode? I actually orderd a JDS Labs Element IV but was scared that it would not as linear as the topping...

In MIDI Management, the clock source is always set to default. Can Core Audio clock directly to the hardware like ASIO, or is there always an asynchronous layer in between?

I am debating whether to get the Topping E2x2 OTG or the E8x8-Pre. Is the $250 price difference on Amazon justified? (The E2xE OTG is $200, while the E8x8-Pre is $450.) I haven't found any reviews of the E8x8, which makes it hard for me to commit to it. However, the extra ADAT out, secondary...

I want to use it to tune car audio, and the specs seem okay with the sample rate of 24-bit/96khz

Hello, these days I am renewing my workstation. My purpose is mainly for measuring speakers, transducers and crossover design. The programs I intend to work with are ARTA & LIMP, and also REW. I'm getting into trouble with adjusting the interface to the microphone he has and I would...

Hi Friends! I've been looking to upgrade my current audio interface to something that better suits my needs. I've basically narrowed it down to two interfaces: - RME Babyface FS Pro - Motu Ultralite Mk5 What really matters to me as a electronic music producer is clean audio with not to much...

Is 2Vrms enough to achieve the maximum SPL when using the -10dBV input of JBL 305p MKii? +6dBV = 1.995Vrms?

The interface has been on the market for quite some time, however there is still no review on ASR. My intention is to rectify this. I won't be adding any photos to the post as these are readily available over the Internet. What I'd like to mention is that the volume knob is significantly less...

Hey all, I know there similar thread and seems like selling my magni/modi and just buy MOTU M2 will be good option for me. But I want to double check if there something better or maybe some alternatives and also have couple questions. The main issue: too many boxes on table and too many usb...

Hi everyone, Long time forum reader but first time posting. I think I need some advice as I am looking for a new interface for music production, but the scarce availability of most products is making my choice pretty difficult. I’m on a Windows 10 Ryzen system, and I need 2 inputs with...

Do USB Midi Controllers such as Presonus Atom SQ benefit from Audio Interface Latency ? Are there any Audio Interfaces that can take in such a device with USB connection : https://www.presonus.com/products/ATOM-SQ and would you see any benefit compared to connecting it directly to a USB port of...

Hi, im new here, been reading a few weeks, getting ideas for my setup to play guitar and since I’ll do it on headphones,it seemed the place to ask, sorry to make my first thread a question,also apologies if this has been discussed,I had a search and couldn’t,like I’ll explain in a moment, im...

Up until recently I was using the Digilent Analog Discovery 2 to perform audio measurements on my DIY audio projects - with 14-bits of resolution, it's a surprisingly powerful and cost effective little device. And while still an exceptional and blisteringly fast scope - I honestly can't see...

I'm an audio DIYer, and I want to start making high quality measurements of some of my designs - power amplifiers, headphone amplifiers and preamps. I've got a decent scope, some high power dummy loads and some highly precise attenuators I've built - so all I need now is a decent soundcard or...

I just spent an hour with my new DX3 Pro. Holy crap!! Low Gain mode... WOW! I've been using my Apogee Ensemble (the newer Thunderbolt version) for a couple years and assumed it was EXACTLY how my OPPO PM-3's + upgraded cable are supposed to sound. It's a $2,500 interface with presumably amazing...